revoracing247 Posted February 26, 2013 Report Share Posted February 26, 2013 hey guys quick question for you. on my box i had to paint the port before i assembled the box in order the get the led's in and what not. anyways now im paint the whole box and i don't know how to correct go about the next part. when started sanding and laying down primer i taped off the port a little ways down so that crap in there and so primer wouldn't fall all the way down the port. and well after the primer, i took off the covering and taped it again a little further down the port so i could sand smooth the primer. unsanded sanded anyways, im getting ready to start painting some color on the port and im wondering if i should leave the new taping so the over spray doesn't fall down to the bottom. or if i should take it off cause there's gonna be a really noticeable line where the tape is right now. any input would be greatly appreciated. edit: dang spelling I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
Carbon Posted February 26, 2013 Report Share Posted February 26, 2013 Why not just paint without the tape? Like paint the port as well as the visible inside of the box? Link to comment Share on other sites More sharing options...
revoracing247 Posted February 26, 2013 Author Report Share Posted February 26, 2013 cause im worried having the over spray from shooting color will get down in the port and get on top of the clear coat from when i painted before and it'll be noticeable I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.