larryspeller Posted February 27, 2013 Report Share Posted February 27, 2013 I have a single cab 94 s10 i would like to put a DC 10inch L3 sub down the middle of my console . Quote Link to comment Share on other sites More sharing options...
knubs Posted February 27, 2013 Report Share Posted February 27, 2013 what do you need help with? Quote Link to comment Share on other sites More sharing options...
larryspeller Posted February 27, 2013 Author Report Share Posted February 27, 2013 I dont know if if the DC 10inch L3 will fit down the center where my console is @ and would it b loud in my single cab ported or what about HDC3 10in Quote Link to comment Share on other sites More sharing options...
Noel989 Posted February 27, 2013 Report Share Posted February 27, 2013 whats your maximum space/dimensions you have to work with? Quote Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
larryspeller Posted February 27, 2013 Author Report Share Posted February 27, 2013 I'm new to this i can't do a lot for my single cab but if i can do 1 of a really good 10 sub that hit hard and low tune @34 ported I'm happy. I don't want to do a blowthough Quote Link to comment Share on other sites More sharing options...
larryspeller Posted February 27, 2013 Author Report Share Posted February 27, 2013 I don't know that or what I'm checking LOL in not experience all i know is that i have bucket seats i thank u for taking time to help me Quote Link to comment Share on other sites More sharing options...
Noel989 Posted February 27, 2013 Report Share Posted February 27, 2013 with out any dimensions nobody is going to be able to help with dimensions someone canhelp you out designing a box to your needs a 10 inch sub should be an easy fit since theydont required a lot of room Quote Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
Noel989 Posted February 27, 2013 Report Share Posted February 27, 2013 do you have a tape measurer? if you do measure the space betwwen the seats how high you want it to go and depth length, width , height Quote Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
Krakin Posted February 27, 2013 Report Share Posted February 27, 2013 Okay I am going to do a build in my single cab '03 Sierra in between the seats. The seats are 40-20-40 so the space in between each bucket seat is 11.9" The box will be 11.5" wide. You figure that by taking a measuring tape and measuring it from the edge of one seat to the other, how close to the front of the cab from the rear wall you want to go, and how high you want the box to be. Being only a single 10" you will probably have a much easier time not taking out the seats to put in a box as your center console and just stick it behind the seats. Quote Krakin's Home Dipole Project http://www.stevemeadedesigns.com/board/topic/186153-krakins-dipole-project-new-reciever-in-rockford-science/#entry2772370 Krakin, are you some sort of mad scientist? I would have replied earlier, but I was measuring the output of my amp with a yardstick . . . What you hear is not the air pressure variation in itself but what has drawn your attention in the two streams of superimposed air pressure variations at your eardrums An acoustic event has dimensions of Time, Tone, Loudness and Space Everyone learns to render the 3-dimensional localization of sound based on the individual shape of their ears, thus no formula can achieve a definite effect for every listener. Link to comment Share on other sites More sharing options...
larryspeller Posted February 27, 2013 Author Report Share Posted February 27, 2013 Okay i will do the measure later in the morning it raining out and i will give y'all the l,w,h again thanks for y'all for your time Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.