ARMYSGT_D Posted February 9, 2008 Report Share Posted February 9, 2008 is a t4004 strong enough to run my 165K2P SETS AND MY 165V2 IN THE BACK says it 25x4 at 4ohms do i run all 4channels or do i run it bridged how would i wire the 2 xover networks together to 1 bridged channel of the t4004 i see steve ran it in the navigator current set-up kenwood ddx 712 clarion eq focal 165 k2p front focal 165v2 rear 2 re audio sexxx 12 us amps md3d us amps md42 1 optima yellow top (rear) 1 xs power 5100r (front) big 3 and 1 run 1/0 stinger wire my build my rebuild Link to comment Share on other sites More sharing options...
ARMYSGT_D Posted February 10, 2008 Author Report Share Posted February 10, 2008 anyone current set-up kenwood ddx 712 clarion eq focal 165 k2p front focal 165v2 rear 2 re audio sexxx 12 us amps md3d us amps md42 1 optima yellow top (rear) 1 xs power 5100r (front) big 3 and 1 run 1/0 stinger wire my build my rebuild Link to comment Share on other sites More sharing options...
may03LT Posted February 10, 2008 Report Share Posted February 10, 2008 FWIW, birthsheet spec on my T4004 is 93 X 4 @ 4 ohms. I have it pushing 2 sets of RF Power 6.5's in 4 channel mode and it sounds great. Im confident you will also have good results with this amp in 4ch mode. Link to comment Share on other sites More sharing options...
loganberry Posted February 10, 2008 Report Share Posted February 10, 2008 yea rockford under-rates there stuff so bad, you should have no problem at all My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.