Joe X Posted March 30, 2013 Report Share Posted March 30, 2013 Here is a suggestion: Enclosure Specifications:Fb = 32 HzVb = 7 ft^3External Height = 21.75 inExternal Width = 39.5 inExternal Depth = 23.5 inPort Width = 30 inPort Height = 3 1/2 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2Left & Right Sides = 22 x 19 1/2Front & Back = 39 1/2 x 19 1/2L Port Internal Assembly Parts:Front to Back = 18 1/2 x 31 1/2Extension = 5 3/4 x 31 1/2Port Left Side Assembly:18 1/2 x 3 1/210 x 3 1/2Port Right Side Assembly:18 1/2 x 3 1/210 x 3 1/2 Assembly guide (generic dimensions): Important notes:- The port needs 3 1/2" of free airspace in front of it for proper operation.- Setting your amp subsonic filter to 28Hz is suggested. Link to comment Share on other sites More sharing options...
Keveeno Posted April 12, 2013 Author Report Share Posted April 12, 2013 Thanks joe for the box specs. Just kinda curious. I was wondering if you know a lot about 6th order bandpass boxes, and is it possible to fit in this application? Just mainly looking for airspace of each chamber and port dimensions for the ports. I can take out the back seat as well to do like a c pillar wall, port towards the front. Link to comment Share on other sites More sharing options...
Brody Smith Posted March 31, 2015 Report Share Posted March 31, 2015 Here is a suggestion: Enclosure Specifications: Fb = 32 Hz Vb = 7 ft^3 External Height = 21.75 in External Width = 39.5 in External Depth = 23.5 in Port Width = 30 in Port Height = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2 Left & Right Sides = 22 x 19 1/2 Front & Back = 39 1/2 x 19 1/2 L Port Internal Assembly Parts: Front to Back = 18 1/2 x 31 1/2 Extension = 5 3/4 x 31 1/2 Port Left Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Port Right Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Assembly guide (generic dimensions): Important notes: - The port needs 3 1/2" of free airspace in front of it for proper operation. - Setting your amp subsonic filter to 28Hz is suggested. can you make this same box and same tuning for an sp4 15? please and thank you Link to comment Share on other sites More sharing options...
Karkov Posted March 31, 2015 Report Share Posted March 31, 2015 Here is a suggestion: Enclosure Specifications: Fb = 32 Hz Vb = 7 ft^3 External Height = 21.75 in External Width = 39.5 in External Depth = 23.5 in Port Width = 30 in Port Height = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2 Left & Right Sides = 22 x 19 1/2 Front & Back = 39 1/2 x 19 1/2 L Port Internal Assembly Parts: Front to Back = 18 1/2 x 31 1/2 Extension = 5 3/4 x 31 1/2 Port Left Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Port Right Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Assembly guide (generic dimensions): Important notes: - The port needs 3 1/2" of free airspace in front of it for proper operation. - Setting your amp subsonic filter to 28Hz is suggested. can you make this same box and same tuning for an sp4 15? please and thank you In the other thread you said you had an 18? 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Brody Smith Posted March 31, 2015 Report Share Posted March 31, 2015 Here is a suggestion: Enclosure Specifications: Fb = 32 Hz Vb = 7 ft^3 External Height = 21.75 in External Width = 39.5 in External Depth = 23.5 in Port Width = 30 in Port Height = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2 Left & Right Sides = 22 x 19 1/2 Front & Back = 39 1/2 x 19 1/2 L Port Internal Assembly Parts: Front to Back = 18 1/2 x 31 1/2 Extension = 5 3/4 x 31 1/2 Port Left Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Port Right Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Assembly guide (generic dimensions): Important notes: - The port needs 3 1/2" of free airspace in front of it for proper operation. - Setting your amp subsonic filter to 28Hz is suggested. can you make this same box and same tuning for an sp4 15? please and thank you In the other thread you said you had an 18? i personally have an 18 and am building this box. my friend has an sp4 15 and wants the same box but he wants it sized and tuned to a 15 inch sp4. Link to comment Share on other sites More sharing options...
Karkov Posted March 31, 2015 Report Share Posted March 31, 2015 Here is a suggestion: Enclosure Specifications: Fb = 32 Hz Vb = 7 ft^3 External Height = 21.75 in External Width = 39.5 in External Depth = 23.5 in Port Width = 30 in Port Height = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2 Left & Right Sides = 22 x 19 1/2 Front & Back = 39 1/2 x 19 1/2 L Port Internal Assembly Parts: Front to Back = 18 1/2 x 31 1/2 Extension = 5 3/4 x 31 1/2 Port Left Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Port Right Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Assembly guide (generic dimensions): Important notes: - The port needs 3 1/2" of free airspace in front of it for proper operation. - Setting your amp subsonic filter to 28Hz is suggested. can you make this same box and same tuning for an sp4 15? please and thank you In the other thread you said you had an 18? i personally have an 18 and am building this box. my friend has an sp4 15 and wants the same box but he wants it sized and tuned to a 15 inch sp4. Gotcha, killer sub(s) man, I run some myself. Wasn't hating, just clarifying in case someone took the time to design something and wasn't correct because of mistype or something (wasted time). All good. =) 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Brody Smith Posted March 31, 2015 Report Share Posted March 31, 2015 Here is a suggestion: Enclosure Specifications: Fb = 32 Hz Vb = 7 ft^3 External Height = 21.75 in External Width = 39.5 in External Depth = 23.5 in Port Width = 30 in Port Height = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Top & Bottom (3 parts) = 39 1/2 x 23 1/2 Left & Right Sides = 22 x 19 1/2 Front & Back = 39 1/2 x 19 1/2 L Port Internal Assembly Parts: Front to Back = 18 1/2 x 31 1/2 Extension = 5 3/4 x 31 1/2 Port Left Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Port Right Side Assembly: 18 1/2 x 3 1/2 10 x 3 1/2 Assembly guide (generic dimensions): Important notes: - The port needs 3 1/2" of free airspace in front of it for proper operation. - Setting your amp subsonic filter to 28Hz is suggested. can you make this same box and same tuning for an sp4 15? please and thank you In the other thread you said you had an 18? i personally have an 18 and am building this box. my friend has an sp4 15 and wants the same box but he wants it sized and tuned to a 15 inch sp4. Gotcha, killer sub(s) man, I run some myself. Wasn't hating, just clarifying in case someone took the time to design something and wasn't correct because of mistype or something (wasted time). All good. =) yeah i completely understand. i made sure not to have any typos when i posed it. my buddy just needs the specs for a 15 inch. are you designing a box for me? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.