Single SA-8v2 Enclosure Help

[TRTC360]

Anyways, i've been plugging in numbers on torres and can't seem to come up with a realistic box tuning and port area without making the port extremely long, anyone wanna point me in the right direction for a single SA-8v2 ported enclosure design? Shooting for 12-14sqin of slot port tuned to 34hz, don't need to give max dimensions since whatever ya'll come up with will fit regardless of how big it is.

[Joe X]

Here is a suggestion, good to 750 - 800W RMS:

Enclosure Specifications:

Fb = 34 Hz
Vb = 0.66 ft^3

External Height = 9.5 in
External Width = 21.25 in
External Depth = 14 in

Port Width = 1 3/8 in

Cut Sheet List:

* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Front & Back (3 parts) = 21 1/4 x 9 1/2

Left & Right Sides = 11 3/4 x 8

Top & Bottom = 21 1/4 x 11 3/4

L Port Internal Assembly Parts:

Front to Back = 10 3/8 x 8
Extension = 16 1/4 x 8
Extension 2 = 3 1/8 x 8

Assembly guide (generic dimensions):

Important notes:

- The port needs 1 3/8" of free airspace in front of it for proper operation.

- Setting your amp subsonic filter to 28Hz is suggested.

[TRTC360]

well thanks to Joe X me and my dad got the box built today, sounds great, plays low with authority for a single 8 with one blown coil, can't wait to get the recone and deaden the hatch area on my car to see how much better it will sound, never seen a sub with some much excursion haha. On to the pics.

[Joe X]

Beautiful clean cuts and precise assembly, great build job TRTC360.

[TRTC360]

Beautiful clean cuts and precise assembly, great build job TRTC360.

Thanks joe, struggled a little lining everything up right since this wood was a little warped due to moisture, also struggled getting the port opening to line up perfectly but regardless it turned out great, sounds amazing, need to do some more work on it to pretty it up.