kicker417 Posted February 13, 2008 Report Share Posted February 13, 2008 i was wonderin if anyone could maybe sketch me a design of maybe a box for a 15 L7 maybe like 4.1cube feet tuned to 32hrt ported Quote Link to comment Share on other sites More sharing options...
Derrick824 Posted February 13, 2008 Report Share Posted February 13, 2008 The dimensions of your trunk/cargo area would help. Quote Link to comment Share on other sites More sharing options...
kicker417 Posted February 13, 2008 Author Report Share Posted February 13, 2008 its for a 02 yukon i think it has the same cargo area as yours Quote Link to comment Share on other sites More sharing options...
SPL2K Posted February 13, 2008 Report Share Posted February 13, 2008 49X16X16 Vent is 14.50T X 4.00W X 18 long. Quote Michael Hughes = 6X SPL World Champion - Loudest on the planet in db Drag, USACi, and IASCA. Link to comment Share on other sites More sharing options...
kicker417 Posted February 13, 2008 Author Report Share Posted February 13, 2008 iam a noob to this but will have my pops help me out he is the carpenter would that be 49in long 16 tall and 16from the front to the back Quote Link to comment Share on other sites More sharing options...
SPL2K Posted February 13, 2008 Report Share Posted February 13, 2008 iam a noob to this but will have my pops help me out he is the carpenter would that be 49in long 16 tall and 16from the front to the back thats correct. all 3/4" MDF. the sub will be on the far drivers side and the port will be on the far passenger side both firing towards the rear. Quote Michael Hughes = 6X SPL World Champion - Loudest on the planet in db Drag, USACi, and IASCA. Link to comment Share on other sites More sharing options...
kicker417 Posted February 13, 2008 Author Report Share Posted February 13, 2008 (edited) thanks alot on my way to home depot one more question how about the vent kinda confuse. because if its 16 from front to back and it has to be 18 inches kinda confuse Edited February 13, 2008 by kicker417 Quote Link to comment Share on other sites More sharing options...
kicker417 Posted February 13, 2008 Author Report Share Posted February 13, 2008 ok got back from home depot still need help with the vent kinda got lost in the measurements Vent is 14.50T X 4.00W X 18 long Quote Link to comment Share on other sites More sharing options...
kicker417 Posted February 13, 2008 Author Report Share Posted February 13, 2008 and 1 more question about how many inches should i put each screw apart from each other Quote Link to comment Share on other sites More sharing options...
SPL2K Posted February 13, 2008 Report Share Posted February 13, 2008 ok got back from home depot still need help with the vent kinda got lost in the measurements Vent is 14.50T X 4.00W X 18 long right. The outside dimensions are 16" tall and the box walls are 3/4" thick so the inside dimensions (same as port heighth) would be 14.50 tall. The width of the port opening is 4.00" wide and the length of the port is 18.00". The port will have to be "L" shaped since the box is less than 18.00 deep. Screws should be approx 6" apart to keep the mdf from splitting. Quote Michael Hughes = 6X SPL World Champion - Loudest on the planet in db Drag, USACi, and IASCA. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.