Bmike Posted May 25, 2013 Report Posted May 25, 2013 i have those comps, and ill have to say that they do sound good to me,im running them along with a p400-2 fosgate amp. at first my tweets would shut down at high volumes. after a bit of investigating on google i learned they a have some sort of poly-resistor that heats up when distorted or over powered and shuts them down, since then i adjusted my gains down a bit and the issue is solved, 2007 trailblazer lthead unit- pioneer p4300dvd crescendo ft-1 supertweeters pioneer m650 pros audiocontrol 2xs crossover Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas
redrider Posted May 26, 2013 Author Report Posted May 26, 2013 i have those comps, and ill have to say that they do sound good to me,im running them along with a p400-2 fosgate amp. at first my tweets would shut down at high volumes. after a bit of investigating on google i learned they a have some sort of poly-resistor that heats up when distorted or over powered and shuts them down, since then i adjusted my gains down a bit and the issue is solved, thanks for the advice... not sure when i will get them in still need to buy the rear coax's and an amp to power them. i want to get the matching ppi black ice amp to do so but need to sell these kicker subs and kenwood amp thats just taking up space in the truck now before i can do so. in all i just cant wait to hear how this box will sound..... audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
redrider Posted May 26, 2013 Author Report Posted May 26, 2013 ok so i started to sand this bad boy and did a test fit as well.... my only issue with the test fit was port issue. the big ass elbow i have doesnt go in place now. it did before i wrapped it so im thinking it might have shifted alittle during wrapping but not by much. so now i gotta see if i cant find a different less bulky elbow or i may have to step down to a 2" port other than that everything is going good with fitment. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
redrider Posted May 26, 2013 Author Report Posted May 26, 2013 no need to worry about the port anymore audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
redrider Posted May 27, 2013 Author Report Posted May 27, 2013 thanks. i did alittle more filler tonight. i must say its smoothing out better than i expected. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
lancelot0069 Posted May 30, 2013 Report Posted May 30, 2013 Very nice progress. Just doin' my thing in the car audio. Still working on getting build forums up. Gen Coupe http://www.stevemeadedesigns.com/board/topic/188409-2013-38-genesis-coupe-track-when-speed-meets-bass/
redrider Posted June 5, 2013 Author Report Posted June 5, 2013 haven't done much lately but to really update but will just say its smoothing out nicely..... audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
redrider Posted June 7, 2013 Author Report Posted June 7, 2013 my color choice http://www.eastwood.com/eastwood-boulevard-black-paint.html audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
Recommended Posts
Archived
This topic is now archived and is closed to further replies.