Jump to content

SojiaRaggs9000's SuperCharged 08 Chrysler 300 3.5L V6 - UBL


Recommended Posts

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

AND NOW FOR THE LATE NIGHT UPDATE:

Top side was painted today at lunch by my buddy. I came over and snapped a quick picture.

photo1-6.jpg

I got off work a little bit late so sorry for the night time pictures... Ill get some better ones tomorrow. Shit looks mean tho haha. Also I decided against painting the stripes.. just in case I ever want to take them off. Ill be getting some new vinyl stripes applied.

photo31-1.jpg

photo41.jpg

photo51.jpg

I got most of my under the hood bling installed as well.

photo2-6.jpg

photo3-5.jpg

Still need to decide if i want the factory fuse box cover painted or not.

photo3-5.jpg

Eww... my coolant bottle looks terrible.

photo.jpg

But not to worry!! This one will be going in as soon as my stainless lines come in. Fresh coolant, new lines and new sexy coolant tank!

photo11-1.jpg

photo21-1.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

  • Replies 21
  • Created
  • Last Reply

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



I'm really liking how it turned out. Here are the new day time pics as promised


The eyelids turned out great. Deffantly can't slam the hood or let it drop tho lol...


photo11-2.jpg


photo12-2.jpg


photo13-1.jpg


photo1-7.jpg


I decided aganist painting the stripes on... Just incase I ever want to change it up. So I'll be getting some new vinyl strips and putting them on. I might even go a tad bit thicker.


photo2-7.jpg


photo3-6.jpg


photo4-6.jpg


And here are some shots of under the hood. Its not finished but... you know haha.


photo5-5.jpg


photo10.jpg


photo9-2.jpg


photo8-3.jpg


photo7-3.jpg


photo6-3.jpg




This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



Here are a few better shots with my camera and a new video is uploading as we speak.



100_1933.jpg


100_1932.jpg


100_1930-1.jpg


100_1931.jpg



I also finally finished sealing up the front of my box.



photo5-4.jpg


photo6.jpg



photo9.jpg





More to come as it progresses....



This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.


* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

  • 5 weeks later...

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

Ok so I finally upgraded my stock speakers. I decided to go with some Pioneer D-Series Mids and Highs. Fronts are TS-D1702C and the rears TS-D1702R. I have some dash ones ordered but they havent arrived yet. They will be the 4" ones, the TS-D1002R.

photo15-1.jpg

I got this powering my front and rear speakers. Its a Rockford Fosgate PBR300x4 mini amp. Pretty powerful for as small as it is haha.

photo16.jpg

photo17.jpg

photo18.jpg

Here are the fronts TS-D1702C. Pretty solid set of speakers for the price.

photo19.jpg

photo1-8.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

photo6-4.jpg

photo7-4.jpg

photo8-4.jpg

Now compare them them my stock 6x9's haha...

photo9-3.jpg

This is how I snaked my wire through the molex connector. Coat hangers and electrical tape ftw.

photo11-3.jpg

photo12-3.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

The rears are TS-D1702R and they'r pretty nice. They're 6 3/4" as well.

photo13-2.jpg

photo14-1.jpg

photo20.jpg

Thats it for now.... more to come as it progresses.

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

  • 2 weeks later...

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



There have been a few updates but I forgot to take some pics finishing up the build haha. Ill take it back apart and snap a few when I get a chance.



I got the fronts TS-D1702C wired up and mounted.



100_1969.jpg



100_1967.jpg



Mounted the the tweets in the sail area on the doors.



100_1965.jpg



100_1966.jpg



I mounted the Rockford Fosgate PBR300x4 mini amp behind the trunk wall. Looks like a bit of a cluster but it works for now lol.



100_1970.jpg



100_1971.jpg



I ditched the stock Head unit for a Nice SQ deck. Its an Eclipse CD3200. Looks sexy and works great. Tested it with my DD-1 and maxed out at 80 its gets a clean undistorted signal.



100_1962.jpg



100_1964.jpg



I finally got it all buttoned back up its just a matter of dialing it all in. Here is a video I made. Its a little long but I hope you guys like it. It took me a while to edit it.






This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.


* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



Oh yeah I also got my new stripes on ( I went a little larger this time ) and took off the side moldings on the doors. I must say it looks a lot better.



100_1958.jpg



100_1959.jpg



100_1960.jpg



This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.


* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

  • 1 year later...

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



Well i got the supercharger back from paint. I must say it does looks good all assembled. Painted it cool vanilla to match the car.



photo1-9.jpg



photo2-8.jpg



OK I decided to go ahead and tackle this install this weekend. Im still waiting on a few other things to go with an intercooler setup but for now Ill just install the kit as intended. I already have a true cai so I didn't need to uninstall the air box assembly. So I started with taking the plenum off.



image-1.jpg



image.jpg



I made sure to cover the intake with some rags so that dirt and debris wouldn't fall off into the engine. I held the plenum up and out of the way with a ratchet strap. That way I could start tackling the spark plugs and injectors.



image-2.jpg



Got the old plugs out and for only 58k on the clock it had some nasty ass plugs!!



image-3.jpg



Out with the old and in with the new NGK plugs! I gaped these to .032 peR what Brent Hughes suggested.



image-5.jpg



If your worried about torque specs grab yourself one of these handy devices. I love it, no more guess work.



image-4.jpg



Next I took out the fuel rail and got ready to swap out the injectors.



image-6.jpg



SRT4 injectors



image-8.jpg



I took all the old one off.....



image-10.jpg



Then I installed the SRT4 injectors.



image-9.jpg



I then buttoned it all back up and installed the new 3 bar map sensor.



image-13.jpg



image-14.jpg



Once that was all done I took out the stock radiator reservoir.



image-11.jpg



Next I installed the relocation tank and ran all the hoses.



image-12.jpg



* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 214 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...