Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 DOOR PANELS ARE FINISH!!! WOOT WOOT!! Looks Great man, wrapping sure hides any flaws in body work. Clean wrap job, good looking panels Bro. enclosures coming alone nicely too i see. Keep it up man. Chipping away at it is the only way to get it done. Appreciate it bro!! I actually did more body work that isn't pictured.. wasn't super perfect but as you can tell, all the lines in the door and transitions are on point.. my last set of doors, you could see the transition from factory panel to fiberglass, this time everything is in sync And Yes bro, any little time I get I try to touch it as little bit haha Also I sent out my doors to upholstery again with me being under crunch time.. 2weeks away from the big show and my next 2weekends are gone, between vaca and getting my car painted, plus I go to school and work FT so I had to send them off so I can focus on the rest 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 Nice ass doors man, now lets see how they look with speakers in them. Appreciate it bro, They're actually still at the upholstery shop.. going to get them tomorrow since I had class and work today! Also I still have to purchase the HSK130s, but I'ma take of that tomorrow!! Doors turned out nice! Appreciate it bro!! I love have these turned out compared to my last set.. my last set I didn't do near as much body work and it urked my nerves completely even though they were decent looking lol.. but this shit right here... this shit right here!! *katt williams tone* lol 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
boometro Posted February 9, 2016 Report Share Posted February 9, 2016 good shit bro. nice work on those panels Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 good shit bro. nice work on those panels Appreciate the love bro!! It was a lot of trial and error on those rings, but in the end it turned out better than I expected!! Definitely satisfied with these!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
boometro Posted February 9, 2016 Report Share Posted February 9, 2016 get them bitches installed in the car. bet they will look tits bro. Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 get them bitches installed in the car. bet they will look tits bro. Next week bro!! I'm going on vaca this friday so between getting ready for that and my exam on thursday, I have to put off for the time being :/ 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
boometro Posted February 9, 2016 Report Share Posted February 9, 2016 werd, vaca time is awesome. exam not so much Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 werd, vaca time is awesome. exam not so much LMAO FOR REAL!!! At least the vaca is after the exam haha... wont have to worry about shit while I enjoy my time away from home! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 Alright so I have a little update for you guys!! I got the carpet trimmed up nicely around the edges before the counter sunk area... Although it may not seem like much but running a blade along the edge, that shit was VERY tedious!! If you've ever carpeted an enclosure, you would know how stretchy the material is.. with that being said, it makes your cuts jagged and uneven .. So i actually had to stretch every inch with my finger tips and run a blade in between to get the material perfect! Also having to reglue some of the parts closer to the edge so it won't lift over time, esp around the sharp points... All frayed carpet was melted with a heat gun to make the edges nice and smooth all the way around! Any ways, enough talking... Time for Pics!! Notice the 1" round over!! Such a sexy transition Also got the aeroport holes cut out... talk about a PITA!! The port's are flush which already made for a tight fit.. but after cutting the carpet and having some excess into the flush aera, i had to damn near stamp them suckers into place lol My thumb hurt like hell pushing them into place, but I wouldn't have it any other way.. the way the ports press the carpet into the flush area makes it look real good! Any who...... B) B) 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted February 9, 2016 Author Report Share Posted February 9, 2016 Now that all edges are cut, I have to mask off the carpet as I will be painting the countersunk area my oem paint color Stay tuned!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.