Wood's -2011 Altima- AKA "Red Ruby" : New Build (pg.150) #SpringBling

[b-eazy]

Whoot whoot. .can't wait. ..lol ;) ;)

[Wood]

Whoot whoot. .can't wait. ..lol ;) ;)

EAZY.. I CANT WAIT EITHER BUDDY!! LOL

[COLTON94]

So completion date is a month from now?

[Wood]

So completion date is a month from now?

Mids & Highs only, along with deadening.. wont get the Sub stage complete until I put coilovers and the 20s on her!

[Wood]

Ok guys Here's a little update... Sorry if I make this DD installation lengthy but Enjoy!

First Off, im going to start with the materials:

Heat Shrink

Video Bypass Relay Harness

DD Dash Kit

Soldering Gun

And What You ALL BEEN WAITING FOR *Drum Roll*

Sony XAV601-BT

[Wood]

Now on for the install... I tried getting as many pictures as possible (which was plenty), although I skipped a HUGE timeline (lol) because of determination and the fact I was installing by myself.... But I will explain !

[b-eazy]

I'm tuned in ive been waiting for this.... ;)

[Wood]

First things first... For a clean install and wire management purpose, I prepared the wiring harness with shrink tubing prior to color matching the wires like so

After that, I simply stripped each wire and twisted them together making sure each wire is matched correctly

After matching and twisting each wire, I soldered them together

Finally I Heat shrinked the tubing and applied electrical tape around the wires so I would have a bad case of wire spaghetti and risk wires from shorting due to being pinched or bent improperly.. And heres the result:

The wires that were lose were my ground wires.. although the harness provides a ground, I took the extra step to splice a wire with an electrical connector to the frame for future purpose when I decide to expand it

[Wood]

I'm tuned in ive been waiting for this.... ;)

Thanks B.. You keep hope alive for my thread lol, if nobody here I know you got me!!

[Wood]

Ok now on to the fun part ... For a Nissan, Its Fairly Easy, YET if your not used to taking cars apart, it'll be difficult!!! (Which is a good thing for security reasoning haha!!)

The Radio in my car is held in by the air conditioning duct 4 screws and a panel... First off.... Air Conditioning Duct

After that you expose 2 of the screws, next there's a panel that you have to pull to expose the last two screws... And after alls said and done... here it goes: