Jump to content

June 2013 SOTM Nominees - Sponsored by SMD and WCcarAudio.com


Recommended Posts

I'll throw myself in. Build log is in my sig.

(This wire mess is usually covered up by my backseat...not quite this rough)

20130516_231503_zps667495e0.jpg

Normally looks like this!

20130311_195019_zps9f89e9cd.jpg

20130516_231648_zps7b31145a.jpg

20130526_120242_zps7d14dc74.jpg

20130527_013330_zps954f75a3.jpg

20130527_015358_zpse8bd5347.jpg

20130403_153232_zpsd4d15e82.jpg

And just a little taste of the setup...has very good sound quality!

must be finished box (painted/carpet/vinyl/ect)

Build log

http://www.stevemeadedesigns.com/board/topic/166486-alexs-02-intrepid-budget-build/

2 12" SKAR Audio VVXv2 d4 @ 1ohm

vvme qa-d1500

Pioneer Head unit deh-8400bh

2 Kenwood KFC-1693PS 3-Way 6.5"

2 stock sail speakers/tweeters (Infinity premium stock)

Polk Audio DB351 3.5" (upgraded from a factory 2.75" speaker or something weird like that dremeled to fit)

2 Sony Xplod XS-R6944 6" x 9" 4-Way's

Link to comment
Share on other sites

Toss me in again. My Chrysler's build log is in my sig.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

Pioneer 80PRS

Alpine PXA H701 w/ RUX-C701

Sundown Audio ZV3 12's

Hertz MP15K Unlimited

Hertz SPL Show SV165 x 8 pcs

Hertz SPL Show ST44 x 4 pcs

Hertz HDP4 x 2 Pcs

Mechman 300A Alternator

Shok Industries Ref Pro Cables

Audio Art 260.6XE

Custom Bus Bars

My youtube channel - https://www.youtube.com/luckyishere12345

My Current Build Log - http://www.stevemeadedesigns.com/board/topic/163038-4th-order-bandpass-wall-4-zv3-12sfrom-india/

My Earlier Build Log - http://www.stevemeadedesigns.com/board/topic/151241-2-fi-sp4s-in-a-ford-in-india/

Link to comment
Share on other sites

I'll throw myself in. Build log is in my sig.

must be finished box (painted/carpet/vinyl/ect)

So you are saying I could literally go put a coat of paint on it and call it good? Probably won't do it for this month's, but that would be acceptable?

'98 Chrysler Concorde LXi
Pioneer DEH-80PRS (HU/processing)
Rockford Fosgate T1652-S (components) for front
Rockford Fosgate T1693 (6x9s) for rear
Rockford Fosgate T600-4 running those
Rockford Fosgate T1500-1bdCP running a

Rockford Fosgate T1D215 15"
in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)
Kicker PKD1 (0 & 4 AWG)
stock 130 amp alt for now; One yellow top Optima
Installed everything myself & built box (brother helped)

Used a DD-1 to set gains.

Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/

Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images

Link to comment
Share on other sites

I'll throw myself in. Build log is in my sig.

must be finished box (painted/carpet/vinyl/ect)

So you are saying I could literally go put a coat of paint on it and call it good? Probably won't do it for this month's, but that would be acceptable?

So long as it looks finished, if its a very spotty paint job it probably wont fly. someone had that problem 2or3 months ago. looks good though imho. Its nice to see another second gen on here. Concord right?

Build log

http://www.stevemeadedesigns.com/board/topic/166486-alexs-02-intrepid-budget-build/

2 12" SKAR Audio VVXv2 d4 @ 1ohm

vvme qa-d1500

Pioneer Head unit deh-8400bh

2 Kenwood KFC-1693PS 3-Way 6.5"

2 stock sail speakers/tweeters (Infinity premium stock)

Polk Audio DB351 3.5" (upgraded from a factory 2.75" speaker or something weird like that dremeled to fit)

2 Sony Xplod XS-R6944 6" x 9" 4-Way's

Link to comment
Share on other sites

Oh damn, got alot of good builds in this month!

Gonna be a hard vote for sure.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1991 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...