MrClean636 Posted July 14, 2013 Report Posted July 14, 2013 I have a pair of Rockford Fosgate T2652-S component speakers and a pair of RF T1692 coaxial speakers. Need an amp for them. I already have a RF T400-2 from my prior build which only powered those components in my old ride. Now I need more power for the added rear speakers Love the RF amp, not sure if I should get the T600-4 or T800-4 though. The 600-4 would basically output the power of my 400-2 but with two more channels. I didn't have it cranked too much in my old car but I feel I will need to this time around. Anyone have experience with the Power series speakers and know if I should match RMS or give myself some headroom? Thanks!! Car: 2011 Ford Taurus SEL / Alt: DC Power 270XP (Will be here 7/17!!!) Deck: Pioneer AVIC-Z140BH / Amps: (1) DC 5.0k, (1) RF T400-2 Speaks: RF T2652-S 6.5" and RF T1692 6x9" Subs: (2) DC XLm2 15's / Batts: (2) XS XP3000's Wiring: Kolossus Fleks Kable 1/0 (2 runs)
severancej Posted July 16, 2013 Report Posted July 16, 2013 Hey man, if I could i'd get the 800 just because of the extra tech that amp and the 1000 have.. 98' dodge ram 140A alt Big 3 XS D2700 JVC kd-r310 Rockford T500-1BDCP 2 Sundown E12 Ported 4cubes 35hz Rockford P400-4 2 Infinity reference 3way 6x9 2 Polk DB 5 1/4 2x layer dynamat all doors
john253a Posted July 16, 2013 Report Posted July 16, 2013 If you already have the T400.2 get the matching t400.4 And by-amp the front the the 400.2 on mid and 400.4 on high And use the other 2ch if the 400.4 on the rear
Lifted2000Ford4x4 Posted July 17, 2013 Report Posted July 17, 2013 they should be able to take more then rated power if its clean. and also you have rise. so get the bigger amp.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.