swishahouse22 Posted August 9, 2013 Report Share Posted August 9, 2013 i would check ur field wires on the alt two skinny wires [media][/media] Link to comment Share on other sites More sharing options...
swishahouse22 Posted August 9, 2013 Report Share Posted August 9, 2013 my alt was reading 11.8 then i found it was a red wire from the alt that goes to the ign switch [media][/media] Link to comment Share on other sites More sharing options...
Polarbear Posted August 9, 2013 Author Report Share Posted August 9, 2013 ok so I took it down to the mechanic the alt is burnt up and I put on a new tensioner.. I learned a lot of stuff today.. well I'm going to call mechman.. 02 impala VM-1 2 dc 12 xl's RF t2500bdcp Second skin damp pro Kenwood head unit 240 mechman alt d3400 in the front d3100 in the rear 50ft Rockford fosgate ofc 1/0 Link to comment Share on other sites More sharing options...
big dee Posted August 9, 2013 Report Share Posted August 9, 2013 no its in great condition but the middle pulley wobbles a bit.. and the belt is a bit loose...i bet your idler pully is shot or water pump is going out . Ether way font drive till you fix it Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 9, 2013 Report Share Posted August 9, 2013 ok so I took it down to the mechanic the alt is burnt up and I put on a new tensioner.. I learned a lot of stuff today.. well I'm going to call mechman.. Sounds like a good day ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.