I have questions on ch amp install..

[bassman619]

So I found out my 4ch amp runs 70w ×4ch @ 2 ohms.. heres my question..if I run 8 speakers 4ohms each 50w rms/100watt peak in parallel (2 speakers per channel) will it work?..will 35w each be able to push these speakers? Will it over work my amp? Will it over work my drivers?..I just dont want to blow anything out..I already spent too much money..

[bassman619]

So if im correct that will creat a 2 ohm loadr right?...what do suggest I set the crossover frequencies at.?

[Sergeant_Skyrim]

So if im correct that will creat a 2 ohm loadr right?...what do suggest I set the crossover frequencies at.?

Depends upon the speakers themselves, the application, etc. And yes, if you have 8 4 ohm speakers you can wire them in pairs of 2 with the negatives and positives together for a final load of 2 ohms per channel

[bbeljefe]

Start with the crossover at 80hz and move up as needed.