Ryan_Kao Posted August 30, 2013 Report Posted August 30, 2013 Alright guys, its time to throw a system into the Subaru. Picked it up a few weeks basic, and some stuff has already been put it. Lets go! I havent taken many pictures of the build so far, but I'll take a bunch tomorrow showing what has been done! http://youtu.be/NkSJ-FtoLRk?t=52s Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
Ryan_Kao Posted August 30, 2013 Author Report Posted August 30, 2013 http://youtu.be/NkSJ-FtoLRk?t=52s Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
TeamHT Posted August 30, 2013 Report Posted August 30, 2013 You have a vision, and you obviously see the small thing that need to be cleaned up, so it's nice to see where people start. Remember this, because in a couple years if you keep learning and gaining experience you will just be astounded at what can be accomplished with the resources here. Good job Tell me...does this smell like chloroform to you?
Ryan_Kao Posted August 30, 2013 Author Report Posted August 30, 2013 Much appreciated! Its hopefully going to come along smoothly. I've ran into a slight speed bump. I may need to replace my alternator Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
Ryan_Kao Posted August 31, 2013 Author Report Posted August 31, 2013 Alright day 2. Here's a few pics to show so far what all has been done. I installed 1 part of the "Little 3 upgrade" i did the new ground to the chasis. Helped keep my voltage just a little more stable. No real gains. Im beginning to notice that my voltmeter that is tapped in to the cigarette light area isnt reading out very accurately. This is where it was idling. I ran the single run of 4 gauge power on the drivers side. I ran the RCA's, remote, and gain control all on the passenger side. Thats all I have for now guys. Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
Ryan_Kao Posted September 4, 2013 Author Report Posted September 4, 2013 nice start Much appreciated! More is coming very soon! Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
Ryan_Kao Posted September 14, 2013 Author Report Posted September 14, 2013 Just a little update Box and amp rack build soon! Yes wires are messy Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
321slapinbass Posted September 14, 2013 Report Posted September 14, 2013 Looks good, get some vids up man 2000 Dodge Durango Subs - (2) SKAR VVX 15 D2's Box - 7.2 ft^3 @ 33hz, 120 in of port Sub amp - Digital Designs M2 @ .5 ohm Mids + Highs - PRV Audio Mids + Highs amp - Hifonics 2000.4 Headunit - Alpine CDE-100 Equalizer - Clarion EQS746 Batteries - Mopar group 27 + (2) C&D 52ah Wiring - 1/0 BIG 3, (2) runs 1/0 Alternator - Singer 250A 147.79 dB @ 35hz - burp - sealed on dash 147.47 dB @ 35hz - music - sealed on dash YOUTUBE: http://www.youtube.com/user/321slapinBass/videos
Ryan_Kao Posted September 20, 2013 Author Report Posted September 20, 2013 Vid will be up in a few minutes, but here's an update pic. The "Little" 3 upgrade is basically done. (Big 3 w/ 4ga) Helped keep my voltage more stable on heavy loads. Cant wait for 1/0gauage all the around. Build in progress: -Pioneer Premiere DEH-P49OIB _Kenwood Excelon KFCX173 6.75" -Kenwood KFC-1094PS 4" -DB Link 4AWG -Soundstream DTR1.900D -Obsidian Audio v2 12" D2 @1ohm -L-Port, 2.5cubes @32hz CHECK ME OUT ON YOUTUBE
Recommended Posts
Archived
This topic is now archived and is closed to further replies.