Team Bassick - Kimo Posted February 28, 2008 Report Posted February 28, 2008 ok cool, so maybe then 50 would be no problem, so i think ill just order 70, for both runs to the back battery, then from the batt to all 3 ampsalso, do i solder from the top only, like pull the connector up a lil bit so there is a lil space, then fill that space with the solder? YOU POSTED IN THE RIGHT SECIONT BUT DIDN'T READ ANY OF THE PINNED THREADS http://www.stevemeadedesigns.com/board/ind...?showtopic=6399 Quote KIMO @teambassick http://www.teambassick.com
Team Bassick Joey Posted February 28, 2008 Report Posted February 28, 2008 YOU POSTED IN THE RIGHT SECIONT BUT DIDN'T READ ANY OF THE PINNED THREADS http://www.stevemeadedesigns.com/board/ind...?showtopic=6399 That looked like sactown's boxes wonder if steve made them and put them in? MMMMMMM? Quote 2007 1st West Coast Regional Champ S/Max 157.3Db 2008 1st West Coast Regional Champ S/Max 158.8Db 2009 160db is my Goal!!! Stetsom's West Coast Rep Team Stetsom
loganberry Posted February 28, 2008 Author Report Posted February 28, 2008 YOU POSTED IN THE RIGHT SECIONT BUT DIDN'T READ ANY OF THE PINNED THREADS http://www.stevemeadedesigns.com/board/ind...?showtopic=6399 lolol go figure, steve is always 1 step ahead of me but i posted this about wire first so HA, im all good, just added the "how to" half way thur.. Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk
audioman21 Posted February 28, 2008 Report Posted February 28, 2008 After your done soldering the connector on(after it cools) give the wire a tug away from the connector to make sure the solder seeped down and bonded with the wires. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.