I need box design

[ham4864]

Hi i want to add a small sub to my girlfriends Toyota Camry

I want to use a E 10D2

Sundown recommends a box of 1.0-1.25 for a ported box tuned to 35Hz

Can someone help with box plans I want to get this done for a x-max present.

i can't seem to find the torres box program everywhere i go it's a bogus download.

[Joe X]

Here is a suggestion:

1.375" = 1 3/8"

Port Parts:

Red: 10 1/8 x 11 1/2
Yellow: 12 x 11 1/2

[ham4864]

question joe on torres the front and back are the same size but on the diagram they are not the same size. Do i subtract the the port width from the front.

This is my first box build. Thank you for your help

[jhmeg2]

I can never get the sketch to post in here. I do the "print screen" thing and past it in the clipboard, and it starts to load, but then when it posts, its gone. What do I need to do?

[KillaCam]

You need to save and upload the image to a hosting site like imageshack.

[audiA6_audio]

question joe on torres the front and back are the same size but on the diagram they are not the same size. Do i subtract the the port width from the front.

This is my first box build. Thank you for your help

I can see the confusion but no worries, what happened here. instead of making the front the same as the back he shortened it width wise so that you dont have to cut a hole in it to make the port opening. its alot easier to build the way its represented instead of by the custsheet examples

[ham4864]

thats what i use,now back to my box.

[ham4864]

ok so the front is 23" x 11.5" and what size is the back i'm confused now.

Thanks for answering my noob questions.

[audiA6_audio]

I hope this helps

[audiA6_audio]

so front is actually 11.5x20.875 and the outer port side is 11.5x12.25 (HxW)