Chance_P Posted October 5, 2013 Author Report Share Posted October 5, 2013 Im thinking about pulling the trigger on a sq2200. I also have a line on a used sq3500 for not much more which can do 1400 at 4 ohms. I eventually wanna upgrade to 2x hdc4s so what do you guys think about running my sdc2.5's at 4 ohms on the 3500 for about 6 months until I inevitably upgrade? I understand what electrical I need to keep a 3500 happy at 1 ohm, but I have not readmuch about keeping one going at 4 ohms. Link to comment Share on other sites More sharing options...
Chance_P Posted October 6, 2013 Author Report Share Posted October 6, 2013 Hey guys I finished up the redesigned box tonight. I ended up going with 7.65 net volume, 40hz, 132 inches of port. Sounds a lot more clear than the old box. Still plays down to 32hz with some authority, which was all the lower my box tuned to 34hz would play. It sounds a lot louder at 38-40 than my old box did at 46hz which I did not expect. Looking into a new amp now. Thanks for the suggestions guys. Link to comment Share on other sites More sharing options...
Miguels Posted October 6, 2013 Report Share Posted October 6, 2013 Pick up used 2k or 2500 like sundown or rockerfosgate is that a new company? my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Chance_P Posted October 8, 2013 Author Report Share Posted October 8, 2013 Scored a sq2200, stinger volt gauge, about about 15 feet of various lengths of 1/0 with ring terminals soldered on it today. $220 bucks! Just had to brag for a minute. Going to pick up a termlab from a guy this weekend if I can get my hifonics amp sold. Then ill be able to post something worth while on here. Link to comment Share on other sites More sharing options...
TheMonolith2001 Posted October 23, 2013 Report Share Posted October 23, 2013 I see you already finished but in case you decide to build another one or change subs or something don't be afraid to go a bit over the window line. I am running a system in the same vehicle and I went 22.75 inches high and the only time it effects visibility is when I am off-road and I am backing up a very steep incline. Thanks for sharing the vehicles resonant frequency though. I couldn't find it anywhere! Any tips on eliminating vibrations? I am still tracking them all down! I am also curious to know how you strapped down your box. For now I am using the stock tie down loops but I am not sure how long they will last Link to comment Share on other sites More sharing options...
BigK72Beast Posted November 7, 2013 Report Share Posted November 7, 2013 If you are planning on sound dampening your vehicle, I would look at Dynamat Extreme for flat bare metal, and high density expanding foam in open cabins inside your vehicle. (Trunk lids, multilayered walls, closing off excess space, etc...) As far as making a system louder. Get yourself a pair of DD subwoofers. My first competition I hit a 155.0 with 2 middle end Digital Designs 18" on about 5000 watts. Once you go DD, you never go back. Link to comment Share on other sites More sharing options...
Shelby Cobra Posted November 8, 2013 Report Share Posted November 8, 2013 Is this a grand , and how did you come up with the 46 hz cabin , just wondering but thanks as well i was looking for that also life goes one HP or DB at a time Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.