Blake Farrar Posted October 31, 2013 Report Posted October 31, 2013 alright so i bought a ct sounds 125.4 for my mids n high less than a month ago and i currently have it wired at 2 ohms on channel 1 and 2 with a sundown sa component set and a cresendo cz componet set. so the other day while i was listening to my music i noticed that i couldnt hear the cresendos in my rear deck so i checked them and the were barley playing so i switch the cresendo to channle 2 and they were perfect. so than i checked all of my channles and channel 1 and 2 are at diffrent volumes and so is channel 3 and 4 but channel 1 and 3 are the same and channel 3 and 4 are the same what is going on is the amp broke already???
Soccerballzs Posted October 31, 2013 Report Posted October 31, 2013 Have you checked your front and rear fader on HU? RCA are in good shape. Are you fronts 2 ohm and rears 4 ohm? http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/
Guest Posted October 31, 2013 Report Posted October 31, 2013 wait how did you wire a 4 ohm component set to 2 ohms?
Soccerballzs Posted October 31, 2013 Report Posted October 31, 2013 Are your speakers 4 or 2 ohm? http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/
Blake Farrar Posted October 31, 2013 Author Report Posted October 31, 2013 checked all rca's there also only a few weeks old and there both 2ohms, but how do i mess with the front and rear fader?
Guest Posted October 31, 2013 Report Posted October 31, 2013 strange. because shop information tells me that both of your components are 4 ohm component sets. edit: did you wire the tweeters in parallel to one channel and the mids in parallel to the other channel? thats the only way you can get 2 ohms, if you have one set.
Guest Posted October 31, 2013 Report Posted October 31, 2013 checked all rca's there also only a few weeks old and there both 2ohms, but how do i mess with the front and rear fader? on the headunit. read the manual.
Blake Farrar Posted October 31, 2013 Author Report Posted October 31, 2013 both compoent sets are at 2 ohms when i put either of them on channel 1 or 2 there the same volume the channels are the problem
Soccerballzs Posted October 31, 2013 Report Posted October 31, 2013 What HU do you have? Go into the program for balance and fader control. See if they are out of adjustment. http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/
Keith77 Posted October 31, 2013 Report Posted October 31, 2013 wait how did you wire a 4 ohm component set to 2 ohms? im confused as hell as how he has this wired up.... Edit: Are you using all 4 channels? Thats cool. Im way too old to be upset by shit like that. Your name is winston. Your own parents hated you even before you were born. My penis is bigger than your penis I'm far from loud and my roof/headliner flaps around like Adam's ass on a windy day. I think it depends more on the structure of the vehicle.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.