sps1989 Posted December 5, 2013 Report Share Posted December 5, 2013 I have 2 MTX amps that both basically have the same problem. They both have little to no ouput. They are receiving sufficient voltage from the battery (14.4V) and the RCAs (4V). No matter what settings I use nothing changes. Neither seem to have bad transistors or anything. One looks perfect and the other has burnt speaker outputs, which seems to be the obvious problem. Amps: MTX TA81001D (Right) MTX TE1501D (Left) Could anyone possibly tell me whats wrong or direct me to someone that could fix them? Link to comment Share on other sites More sharing options...
81000D Posted December 5, 2013 Report Share Posted December 5, 2013 Burnt. Link to comment Share on other sites More sharing options...
severancej Posted December 5, 2013 Report Share Posted December 5, 2013 I would contact mtx and get the info on pricing, I once had a thunder x600 that stopped working right, they offered a flat rate replacement or fix if possible i want to say it was about $125 man. Myself.. I went ahead and had them fix it. They sent a new one that worked great for months until it got stolen out my truck... Fkuckin sucked Anyway yu should call mtx Db-r is another business that comes to mind.. Have a look at their website. 98' dodge ram 140A alt Big 3 XS D2700 JVC kd-r310 Rockford T500-1BDCP 2 Sundown E12 Ported 4cubes 35hz Rockford P400-4 2 Infinity reference 3way 6x9 2 Polk DB 5 1/4 2x layer dynamat all doors Link to comment Share on other sites More sharing options...
sps1989 Posted December 5, 2013 Author Report Share Posted December 5, 2013 MTX said they wont fix the ta81001d. Ill ask them about the te1501d. And db-r said they wont fix MTX amps... Link to comment Share on other sites More sharing options...
Kranny Posted December 5, 2013 Report Share Posted December 5, 2013 when its burnt that bad, i dont think it will be repairable. but im no electric guru. i like (not really) how the one amp has five less capacitors than the other amp, when it has the spaces on the board for them. lol. Link to comment Share on other sites More sharing options...
sps1989 Posted December 5, 2013 Author Report Share Posted December 5, 2013 Yeah I thought that was weird too. It has the same stats but the newer one has less components and has 4 35A fuses instead of 4 40A Link to comment Share on other sites More sharing options...
hazestorm23 Posted December 5, 2013 Report Share Posted December 5, 2013 Man I run the 4001d and the 5601 I also have 2 602 new I really like these amps I would say fix them if they are reasonable. Or sell them I have seen them sell for a good amount in far worse condition . Link to comment Share on other sites More sharing options...
hazestorm23 Posted December 5, 2013 Report Share Posted December 5, 2013 So not even the input X10 does anything? Link to comment Share on other sites More sharing options...
sps1989 Posted December 5, 2013 Author Report Share Posted December 5, 2013 It does but not enough to affect anything. May bring up the voltage a mV or two Link to comment Share on other sites More sharing options...
sps1989 Posted December 5, 2013 Author Report Share Posted December 5, 2013 MTX said they would fix the te1501d but not the other. Anyone know somewhere that can fix the ta81001d? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.