Courtnee Edwards Posted December 10, 2013 Report Posted December 10, 2013 4th order or a ported box facing the rear? The car is a Cadillac brougham it has a big trunk I'm 6'3" and I can get inside and lay down. The thing is I don't want to take up the whole trunk. Have any of you ever seen or built a box for this size trunk?
hdorre Posted December 10, 2013 Report Posted December 10, 2013 If it were me and I had the space, time and patience, Id do a 4th order ported through the rear deck. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
LoudBimmer Posted December 10, 2013 Report Posted December 10, 2013 if you put a ported box in the trunk, it will create a 6th order. My trunk is set up same way and I tried ported and 4th order. Ported seems to work best in my application.
Courtnee Edwards Posted December 10, 2013 Author Report Posted December 10, 2013 I would try the forth ported through the rear deck but the deck is filled with 6x9's and 6.5's components with tweets in the middle of the two.
Courtnee Edwards Posted December 10, 2013 Author Report Posted December 10, 2013 @loudbimmer how did you port through the armrest?
bbeljefe Posted December 10, 2013 Report Posted December 10, 2013 What are your goals with this setup? Facebook: facebook.com/audioanarchyllc Instagram: audioanarchyllc Youtube: youtube.com/bbeljefe
SICKSPD Posted December 12, 2013 Report Posted December 12, 2013 Why would it need to be ported into the rear deck and not just sealed off with the port firing forward? 09 Challenger R/T (Audio system under construction): Pioneer AVH-X4500BT (PAC RP4CH11 harness) (2) Sundown Audio SA-8v2 (inverted) CT Sounds AT1400.1D XS Power D3400 40 sq ft. Audiotechnix deadener 1/0 Audiotechnix wiring stock Boston Acoustic 7 speaker amplified system (for now) Sealed trunk enclosure Build log: http://www.stevemeadedesigns.com/board/topic/178399-slammed-dodge-challenger-sundownct-sounds-build/ TEAM GOAT
Recommended Posts
Archived
This topic is now archived and is closed to further replies.