Jump to content

Slammed Dodge Challenger Sundown/CT Sounds Build


Recommended Posts

This is my current build in progress… Ive got an 09 dodge challenger r/t, yeah its got the hemi lol and I've been modding it over time slowly but an audio system has been long over due. It's factory equipped with the "high end" boston acoustic 7-speaker amplified system which will be replaced at the end of the build.

Heres my plan for the car:

Pioneer AVH-X4500BT

-XS Power D3400 battery

-(2) Sundown Audio SA-8 V2s

-CT Sounds AT1400.1D

-1/0 awg Audiotechnix wiring/ Audiotechnix RCAs (possibly temporary)/ Audiotechnix speakerwires

-40 sq. feet of 60 mil Audiotechnix deadener for the trunk

-Another 40 sq ft for the cabin

The mids/highs setup is yet to be determined, but It will be some sort of combo of components and 3.5"s and maybe an additional pair of 6.5" or 5.25"s for the rear deck.

Highs amp hasn't been determined either yet

My goal is to have a quality system that gets low with a tune around 33-35 hertz. (specific tuning is still up in the air). Im going to stay around the manufacturer specs around .75 cubic feet per sub. Preliminary box design puts it at these dimensions: 32”width x 13”height x

12" depth. That might change. I want to retain as much room as possible in the trunk.

I'm considering walling it off to maximize the output and have the amp reverse mounted on the box so you can see the backside.

Heres the car :)

IMG_20130902_121843.jpg

Untitled.jpg

Its on BC Racing coil overs. I'd go lower but the streets here suck so this is low enough. A couple of other mods Ive done so far include a new exhaust system, Hurst short throw shifter, sequential taillights, HIDs, plastidipped wheels and blacked out the front end. Ive still got a lot more planned but all with time and my budget.

Heres the audio equipment I have so far...

20131106_190513.jpg

20131106_190527.jpg

isn't she beautiful? lol

IMG_20131109_125251.jpg

don't forget the twins

IMG_20131108_131908.jpg

09 Challenger R/T (Audio system under construction):

  • Pioneer AVH-X4500BT (PAC RP4CH11 harness)
  • (2) Sundown Audio SA-8v2 (inverted)
  • CT Sounds AT1400.1D
  • XS Power D3400
  • 40 sq ft. Audiotechnix deadener
  • 1/0 Audiotechnix wiring
  • stock Boston Acoustic 7 speaker amplified system (for now)
  • Sealed trunk enclosure

Build log:

http://www.stevemeadedesigns.com/board/topic/178399-slammed-dodge-challenger-sundownct-sounds-build/

TEAM GOAT

signature-1.jpgsubsignature.jpg

Link to comment
Share on other sites

Im tuned TF IN!!!!!!!! Nice Ride!!!!

2011 Nissan Altima aka Red Ruby

HEADUNIT: Pioneer AVH X2700BS

ELECTRICAL:

-Singer 230a

-Northstar gr34

-(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz

-100% Welding Cable

FRONT STAGE:
-(2 Sets) Hertz HSK165

-Hertz HSK130

-Ampere Audio 125.4

SUB STAGE:

-(3) Sundown Audio SA REV2 12's

-Ampere Audio 3800.1 V2

MISC (NON AUDIO RELATED):

-Interior & Exterior Lights LED

-Gloss Black Roof (PAINTED)

-15% Front, 5% Rear Tint

-Roof Spoiler

-20" TSW Snettertons (20x8.5 front, 20x10 rear)

-Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!!

-Aftermarket Fog Lights

-Custom Painted Engine Covers

My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109

Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346

Link to comment
Share on other sites

What color body is that challenger? Such a really nice color.

Its called "titanium metallic". Its one of the less common colors dodge painted the challenger. Gives it that stealthy look with black wheels haha

and thanks everyone for the compliments

09 Challenger R/T (Audio system under construction):

  • Pioneer AVH-X4500BT (PAC RP4CH11 harness)
  • (2) Sundown Audio SA-8v2 (inverted)
  • CT Sounds AT1400.1D
  • XS Power D3400
  • 40 sq ft. Audiotechnix deadener
  • 1/0 Audiotechnix wiring
  • stock Boston Acoustic 7 speaker amplified system (for now)
  • Sealed trunk enclosure

Build log:

http://www.stevemeadedesigns.com/board/topic/178399-slammed-dodge-challenger-sundownct-sounds-build/

TEAM GOAT

signature-1.jpgsubsignature.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 893 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...