mmets Posted January 24, 2014 Report Posted January 24, 2014 I may know the answer here but not sure. I have a 3400 up front, both pos runs are fused about 12 inches from it. Then its fused again before the 3100. I will be putting a couple more 3100's (my awesome blue boxes there lol) in the back. From the first 3100 do I need to fuse the power to the second battery and then from the second to the third or is it really going to matter. Im just taking a guess here but the wires between the batteries would be may 16 inches give or take one or two. (Two runs of 1/0 for power and ground) http://www.stevemeadedesigns.com/board/topic/177477-slowboring-07-trailblazer-build/Pioneer DEH-80PRSPRV 8MR400-NDY (eight) PRV TW350Ti (6)Sky High 1/0 OFC, 12 gauge and 8 gaugeTM Metalworkz battery terminals 120 sqft HushmatXS Power D3100 (6)Singer 350 Amp Alt Singer 320 (2)American Bass SQL3200 JL Audio JX360/4 Crossfire XS 8K (2) DC Audio XL 15s (6)
B-Sh0t Posted January 26, 2014 Report Posted January 26, 2014 your good no need to fuse between rear battery's
alaskanzx5 Posted January 26, 2014 Report Posted January 26, 2014 Got batt banks must people just use bus bars so no you don't need to fuse them t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.