splbeast Posted March 10, 2008 Report Posted March 10, 2008 Please help me! I have two Type R 15's on two Soundstream PCA2000D's. When I hook up the amps to the subs, its not loud at all, but when i hook up both subs to one amp it hits really hard? Any help would be greatly appreciated. Quote T.S.P.
andym85 Posted March 10, 2008 Report Posted March 10, 2008 what kinda voice coils are ur subs and what are those amps rated at? sounds like an impedence problem to me (ohm load problem). Quote i likes me some audio stuff...
Thewes Posted March 10, 2008 Report Posted March 10, 2008 what kinda voice coils are ur subs and what are those amps rated at? sounds like an impedence problem to me (ohm load problem). I had a somewhat similar problem man and It wasn't impedance because I was running one FI BL on my sundown 1500 and when I added my second sub/amp to the system (box is double chambers) it did not sound loud at all. Maybe your electrical just cant power both amps? Quote
kickerman Posted March 10, 2008 Report Posted March 10, 2008 or your amps arnt in tune to each other maby? Quote 18" mmats juggernaut rf t10001bd alpine h/u
splbeast Posted March 10, 2008 Author Report Posted March 10, 2008 Ahh..both amps are seeing one ohm and everything is wired correctly and my back Kinetic is at 13.8-14 something.. Quote T.S.P.
splbeast Posted March 10, 2008 Author Report Posted March 10, 2008 http://www.stevemeadedesigns.com/board/ind...showtopic=18192 These are my subs and enclosure..anyone have any ideas or something I can try in the morning? Quote T.S.P.
RollinSoLow Posted March 10, 2008 Report Posted March 10, 2008 http://www.stevemeadedesigns.com/board/ind...showtopic=18192These are my subs and enclosure..anyone have any ideas or something I can try in the morning? my guess would be one speaker is out of phase 180 Quote
splbeast Posted March 10, 2008 Author Report Posted March 10, 2008 Nah, both amps the phase is set to 0 Quote T.S.P.
techaninna Posted March 10, 2008 Report Posted March 10, 2008 I'm sure you know what your doing but double check your polarities. Also hook one sub to the amp... then unhook it and hook the same sub up to the other amp, then try it with the other amp. That'll tell you if its an amp issue or at least help you isolate the issue. Quote Rebuild coming soon
RollinSoLow Posted March 10, 2008 Report Posted March 10, 2008 is there a phase control on the head unit Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.