Tshaw211 Posted February 2, 2014 Report Posted February 2, 2014 I have a question will the (1) SD-210D4 work in this ported enclosure. After all my calculations the box is .96 sq when adding port and sub the measurement becomes .775 and tuned at 35 hz.. Need some help here trying to fit this in my dodge ram mega cab. Quote
REMT15 Posted February 2, 2014 Report Posted February 2, 2014 not big enough for a ten ported. need at least 1 cube after sub and port displacement. 1.25-1.5 would be ideal. Quote
ToNasty Posted February 2, 2014 Report Posted February 2, 2014 I just built a box for the exact same sub. Ended up being 1.1 cubes with a 4" aero port tuned to 34htz. I was extremely suprised with it. .75 in your case is to small Quote ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
afrakes Posted February 2, 2014 Report Posted February 2, 2014 Too small man. U putting it under the seat? If so just raise the bench a cpl inches an u could prolly port a 12 under there. 1 cube minimum for a 10, 2 cubes per 12. That's my general rule of thumb at least. Quote Vehicle: 2014 GMC Sierra 2500HD WT Head Unit: Pioneer DEH- Mids/Highs: Focal Integration ISC 165’s (front) Subs/Amps: TBD
Tshaw211 Posted February 3, 2014 Author Report Posted February 3, 2014 not big enough for a ten ported. need at least 1 cube after sub and port displacement. 1.25-1.5 would be ideal. Can i do a external port. this is going behind the backseat. or should i just do sealed? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.