Dude2800 Posted March 7, 2014 Report Posted March 7, 2014 I tried to figure this out on my own, but I just got more confused. I'm going to be running a 320 amp alternator, an optima yellow top for my front battery and an xsd3100 for my extra battery in the back. I'm going to be running a xd700/5 and a ct sounds 2500.1 for about 3200 watts of power. Maybe more depending on the ct sounds.(3900 at 14.4V) What is the best way to wire it and what awg?
Dude2800 Posted March 8, 2014 Author Report Posted March 8, 2014 Do I need two runs of 1/0? I've seen where some people run one to the front battery from the alt and one from the alt to the amps.
ChevyBoy95 Posted March 8, 2014 Report Posted March 8, 2014 1 1/0 Positive and negative lead off the alternator to the front battery 2 1/0 Positive runs to the rear bank 2 Frame grounds in the back to the rear battery bank Amplifiers hooked up to rear battery bank Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.