Kyblack76 Posted April 10, 2014 Report Posted April 10, 2014 Check it at the hu. Also, get a meter and check voltage between the two. You may have a bad output on your deck. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
jeffrm Posted April 10, 2014 Author Report Posted April 10, 2014 Everything is clean off the hu. Quote 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz
Kyblack76 Posted April 10, 2014 Report Posted April 10, 2014 So when you plug the dd1 into the one bad RCA out on the HU it works fine? You getting distortion before a signal makes zero sense. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
jeffrm Posted April 10, 2014 Author Report Posted April 10, 2014 No the output that I get the distortion from is on the eq. Not the hu. It has front, rear, and sub outputs on the hu. The front is going to the eq, then from eq to amps. Tested the rcas coming from the hu its clean on 40hz and 1000hz. But once I plug rcas to the eq, its clean on all the eq outputs except the one rca out to subs. The other sub rca is clean but the other is showing signal, distortion, then 40hz. All others show signal, 40hz, then distortion. Quote 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz
jeffrm Posted April 10, 2014 Author Report Posted April 10, 2014 (edited) Tested both sides of the rcas in all the testing. Just the one does that. That's why I think the eq may have a bad output. Edited April 10, 2014 by jeffrm Quote 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz
Kyblack76 Posted April 10, 2014 Report Posted April 10, 2014 Then. You just used the DD1 as a tool. If your clean at a, and c then be is dirty. Probably boosts the voltage or some shit. If it was me, that part of the chain would go bye bye. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Kyblack76 Posted April 10, 2014 Report Posted April 10, 2014 And by the way. .... Well done. Nice job. (Find another eq if you want, but I wouldn't run that one) Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
truthsayer Posted April 10, 2014 Report Posted April 10, 2014 If one rca is clean and the other is dirty. Just use the clean rca with a no signal loss y adapter. Problem soled. Quote truthsayer
jeffrm Posted April 10, 2014 Author Report Posted April 10, 2014 ^^^^ did that and now all is good. Thanks everyone for the help. Quote 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.