JEFFYBOI Posted April 18, 2014 Author Report Share Posted April 18, 2014 The head unit amplifier will distort a lot sooner than the preamp outputs. Typically, they'll distort at ~ half volume while the preamp outs won't distort until 80% or higher. I guess I really need to get my components off the HU amp and get them on a component amp and use the front/rear preouts "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 18, 2014 Author Report Share Posted April 18, 2014 Number two "with supplied harness" wow how did I miss that.. I guess I can pull the HU out and use the harness to hook upto on the HU speaker outputs. I just need to get a component amp to run them "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 20, 2014 Author Report Share Posted April 20, 2014 So new problem... I got my DD1 and I hooked the RCA ( from sub preout ) into DD1 ( completely flat ) (All filters are full range) I had no problem with detecting 40 Hz and got the HU clean upto 60/62 but when I did track 2 for the 1Khz it wouldn't detect it. I had no problem with the 40 Hz tuning my amp also. Just couldn't get it to detect the 1Khz on the HU.... Anyone else have this issue? Im going to try again tomorrow with a new 9V battery. "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
audiofanaticz Posted April 20, 2014 Report Share Posted April 20, 2014 Normally a subwoofer preout will not play 1000hz, meaning you will not have a signal. the 40hz track is for subwoofer preout the 1000hz track is for the front/rear stage preouts that play midrange and tweeter frequencies IE your "problem" is normal and not a problem at all. You would be hard pressed to find a headunit that will play anything over 300hz from the subwoofer preouts let alone 1000hz which is getting into a rather high range frequency Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 20, 2014 Author Report Share Posted April 20, 2014 Normally a subwoofer preout will not play 1000hz, meaning you will not have a signal. the 40hz track is for subwoofer preout the 1000hz track is for the front/rear stage preouts that play midrange and tweeter frequencies IE your "problem" is normal and not a problem at all. You would be hard pressed to find a headunit that will play anything over 300hz from the subwoofer preouts let alone 1000hz which is getting into a rather high range frequency Thank you, I was just going by the manual how it said to repeat steps 3-5 on track 2 it didn't say anything about switching RCA preouts to rear or front. I guess I wasn't aware sub preout don't typically put out anything over 300hz. I know nobody would want a frequency that high for a subwoofer amplifier. Thanks again! "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.