bumpin04voy Posted March 21, 2008 Author Report Posted March 21, 2008 ok well now that we've found my problem can anybody design me a new box that will actually be tuned at 34hz or whatever FI recommends Quote Avic N1 rockford 400.4 type-r comps all around (2) 18" Fi BTLs fully loaded 11 cu ft. vented box 34hz (2)RD Audio 1750.1 (4) optimas
tooloudfortv Posted March 21, 2008 Report Posted March 21, 2008 try to figure out where u went wrong when u calculated for port length and from the sounds of it if i were u id even up the tunning to around 36-7hz. should be an dramatic increase in output Quote
SPL2K Posted March 21, 2008 Report Posted March 21, 2008 go down to about 8 cubes and tune to 38-40. Quote Michael Hughes = 6X SPL World Champion - Loudest on the planet in db Drag, USACi, and IASCA.
tooloudfortv Posted March 21, 2008 Report Posted March 21, 2008 ok well now that we've found my problem can anybody design me a new box that will actually be tuned at 34hz or whatever FI recommends just go inside ur box and cut some port length off and do other improvments into ur box that u missed. u dont have to start an new box. do 45 degree corners in EVERY corner of the box, id also glass the whole inside of the box too. Quote
tooloudfortv Posted March 21, 2008 Report Posted March 21, 2008 go down to about 8 cubes and tune to 38-40. now that box there would give u some SICK numbers!!!!!! if ur looking for something more painful than ur setup now thats the route to go! ur low end want be anywhere close to where its at now but the overall output would be an night and day difference Quote
PaulO2288 Posted March 21, 2008 Report Posted March 21, 2008 now that box there would give u some SICK numbers!!!!!! if ur looking for something more painful than ur setup now thats the route to go! ur low end want be anywhere close to where its at now but the overall output would be an night and day difference Yeah i had my box tuned to 28hz and it would get loud and flex everything but it wouldent create and pressure and get anywhere near as loud as when i cut off some port lenght and made it to 40hz. Still awesome for dialy for me, still low and creates a crap load of pressure. But nothing like my spl burp box tuned to 68hz!!! Loud daily box that hurts and sounds good is the best! Quote
tooloudfortv Posted March 21, 2008 Report Posted March 21, 2008 Yeah i had my box tuned to 28hz and it would get loud and flex everything but it wouldent create and pressure and get anywhere near as loud as when i cut off some port lenght and made it to 40hz. Still awesome for dialy for me, still low and creates a crap load of pressure. But nothing like my spl burp box tuned to 68hz!!! Loud daily box that hurts and sounds good is the best! exactly ive learned the hard way unless ur running serious power, and want ur system to be painful low tuning isnt the way to go. if u want it loud as phuck with what u already have bump that tunning to 36-40hz and i swear ud think u have another system! Quote
bumpin04voy Posted March 21, 2008 Author Report Posted March 21, 2008 if i go down to 8cu ft isnt that gunna be way to small...they recommend a minimum of 5cubes for each sub... and the port is 42.5x5x17.5 Quote Avic N1 rockford 400.4 type-r comps all around (2) 18" Fi BTLs fully loaded 11 cu ft. vented box 34hz (2)RD Audio 1750.1 (4) optimas
tooloudfortv Posted March 21, 2008 Report Posted March 21, 2008 if i go down to 8cu ft isnt that gunna be way to small...they recommend a minimum of 5cubes for each sub...and the port is 42.5x5x17.5 too small depends on power and the power u have i honestly would keep it @ 11 cubes but DEF!!!!!!!!!! up the tunning! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.