scooter99 Posted February 3, 2015 Report Share Posted February 3, 2015 Ok well I say go for it then, and post pics. I'd like to see how it turns out. What trim do you have? XLT, Lariat, etc? Have you lifted it or anything. Looks taller than stock. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
mhuffman Posted February 3, 2015 Author Report Share Posted February 3, 2015 yes it is. its full width from top to bottom. its nothing for me to break out the plasma cutter and welder and do whatever I need to do to make it work. Link to comment Share on other sites More sharing options...
mhuffman Posted February 3, 2015 Author Report Share Posted February 3, 2015 the truck is a lariat 4 door short bed with tow package. the front is 4 linked with 12'' and the rear is all spring no blocks with 8'' and it sits level. its on 22x14s and 40s. im getting ready to redo the front and make it 14'' and possibly 4 link the rear. it has head studs, egr delete, oil cooler, down pipes, full exhaust, intake, sct with custom tunes, yatta yatta yatta. Link to comment Share on other sites More sharing options...
scooter99 Posted February 3, 2015 Report Share Posted February 3, 2015 Wow. Sounds like a nice set up. What brand of tool box is it btw? Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
mhuffman Posted February 3, 2015 Author Report Share Posted February 3, 2015 its a husky. I may pull It out and take some measurements and try to build a low profile ''tool box'' just depends on what dimensions I have to work with to drop it under or flush with the rail Link to comment Share on other sites More sharing options...
scooter99 Posted February 3, 2015 Report Share Posted February 3, 2015 You have a plasma cutter and welder, build your own. Build the enclosure for the subs, figure out what room you have left and build a new box out of diamond metal and you have a custom enclosure, and a custom tool box to fit all of your needs. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
mhuffman Posted February 3, 2015 Author Report Share Posted February 3, 2015 that's what im planning on doing. I think im going to go ttalk to my guy and get an idea of what hes thinking then get on sketchup tonight and try to figure something out. but it might be a few weeks until I even get started on this. I need to finish my bumpers first. and I need to run larger wire also. Link to comment Share on other sites More sharing options...
scooter99 Posted February 3, 2015 Report Share Posted February 3, 2015 Ok, post up pics. Good luck Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
blanestudly Posted February 3, 2015 Report Share Posted February 3, 2015 I kind of want to see what this tool box looks like in the back. Just curious. Link to comment Share on other sites More sharing options...
Dan2427 Posted February 3, 2015 Report Share Posted February 3, 2015 I'd like to see the gooseneck you pull. I'd be curious how it sits or if if u lifted the trailer as well. I don't have the nuts to do a blow through but I know I'm scared to go over any rough terrain in fear of the gooseneck hitting box and I'm only at a4 inch lift on 33s 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.