97burbalade Posted March 12, 2015 Report Share Posted March 12, 2015 I m in search of info on a box design for 2 sa 15 with a slot port in the center with the dimensions of 16" W 35" H up to 36" D it will be 3 boxes side by side in back of a suburban behind second row seats (c pillar wall) I have 6 DVC SA 15s and 3 RF1500 amps, looking for a loud street set up don't care about meter but would like to be able to do hair tricks, not sure if its possible with my combo of power, subs and placement of box in suburban. Any help or input would be great THANKS IN ADVANCE OOO ------ OOO Link to comment Share on other sites More sharing options...
Jeff4661 Posted March 12, 2015 Report Share Posted March 12, 2015 What is the reason for 3 spearte boxes? In my experience it would be more effective to build 1 big box in the same area using a common port Current build 05 Yukon SLT http://www.stevemeadedesigns.com/board/topic/195350-jeffs-05-yukong-wall-build/ Link to comment Share on other sites More sharing options...
Joe X Posted March 12, 2015 Report Share Posted March 12, 2015 It's going to be very space inefficient and heavy to do it that way, extra work to hold the boxes together and to do an effective seal off. Link to comment Share on other sites More sharing options...
97burbalade Posted March 12, 2015 Author Report Share Posted March 12, 2015 OG set up was done that way for fitment the sides are shorter in height than the center of rear barn doors and it was 3 total sealed boxes so sealing was not an issue but I m open to any ideals and I ll post pictures later of old set up Link to comment Share on other sites More sharing options...
97burbalade Posted March 13, 2015 Author Report Share Posted March 13, 2015 I tried to upload pictures of old system no luck not sure if its computer or what , but what would you recommend in a single box for all 6 subs Link to comment Share on other sites More sharing options...
Jeff4661 Posted March 13, 2015 Report Share Posted March 13, 2015 Joe x will probably correct me but Here is a thought 18 cubes NET Tuned to 32hz Port area 380sq inches Do you know how to calculate port length? Current build 05 Yukon SLT http://www.stevemeadedesigns.com/board/topic/195350-jeffs-05-yukong-wall-build/ Link to comment Share on other sites More sharing options...
Jeff4661 Posted March 13, 2015 Report Share Posted March 13, 2015 Op are you doing a c pillar wall? Current build 05 Yukon SLT http://www.stevemeadedesigns.com/board/topic/195350-jeffs-05-yukong-wall-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.