nepjr32 Posted March 12, 2015 Report Posted March 12, 2015 I just got a new truck and am going to to 4 DC m3 8's in it. Was wonder what would be the best option for powering these things/ what impedence I should wire them at. I have a crescendo 3500 right now but was looking to go to something alittle smaller since there isnt much room in an ext cab truck. Just wanted some advice or just wanting to know what amp people have theirs hoooked up to.
MrSkippyJ Posted March 12, 2015 Report Posted March 12, 2015 find a quality amp that has a power output rating comparable to the combined RMS rating of the subs that what ever ohms the subs will be wired too. Aren't they 500watts RMS each? If so find a quality 2k watt RMS amp @ what ever ohms you subs will be wired too. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
CLPeller Posted March 12, 2015 Report Posted March 12, 2015 I ran my 4 off a DC 3.5K at 1 ohm and they handled it no problem Check out my build! 4 sets CT Sounds Meso components in custom fiberglass doors, 4 D'amore Engineering AF-15's on a DC Audio 3.5K http://www.stevemeadedesigns.com/board/topic/187649-2011-f150-fiberglass-doors-half-wall-16000-w/
nepjr32 Posted March 12, 2015 Author Report Posted March 12, 2015 They are 600 rms. Was probably going to wire all 4 in parellel and get the dual 4 ohm versions and wire two pairs both at 1 ohm feeding to the amp. The Crescendo BC 2000 would probably be a good fit then?
nepjr32 Posted March 12, 2015 Author Report Posted March 12, 2015 They are 600 rms. Was probably going to wire all 4 in parellel and get the dual 4 ohm versions and wire two pairs both at 1 ohm feeding to the amp. The Crescendo BC 2000 would probably be a good fit then?
nepjr32 Posted March 12, 2015 Author Report Posted March 12, 2015 I ran my 4 off a DC 3.5K at 1 ohm and they handled it no problem How did you have them wired?
MrSkippyJ Posted March 12, 2015 Report Posted March 12, 2015 not sure how you are wiring four D4 subs to 1ohm though. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
nepjr32 Posted March 12, 2015 Author Report Posted March 12, 2015 not sure how you are wiring four D4 subs to 1ohm though. No wiring two subs that in parellel to 1 ohm and doing that to the other side as well so there is 2 pairs wired from one another
MrSkippyJ Posted March 12, 2015 Report Posted March 12, 2015 so 2 amps? or a 2 channel amp anyway? F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
nepjr32 Posted March 12, 2015 Author Report Posted March 12, 2015 so 2 amps? or a 2 channel amp anyway? two channel amp
Recommended Posts
Archived
This topic is now archived and is closed to further replies.