Jessica Posted March 25, 2015 Report Share Posted March 25, 2015 so you are running your door speakers off the headunit and the sub off an amp? if that is true you are just going to have to set your gains at where you think you door speakers distort, or dd-1 the speaker outputs and use that as max volume. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
SundownZ71 Posted March 25, 2015 Author Report Share Posted March 25, 2015 not downing on you or anything, but If I had of checked an didn't get a signal out of one rca's I would've checked the other one...Yeah I feel like a dumbass as to why I didn't just swap them to see if it did anything. Quote Link to comment Share on other sites More sharing options...
SundownZ71 Posted March 25, 2015 Author Report Share Posted March 25, 2015 Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Quote Link to comment Share on other sites More sharing options...
Jhunt94 Posted March 25, 2015 Report Share Posted March 25, 2015 maybe you've got bad RCA's and you're not getting output on one side Quote 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 25, 2015 Report Share Posted March 25, 2015 (edited) Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Im asking you dude. "Plugged in the negative RCA instead of positive and I got the lights" what does that mean ? you have a positive RCA cable, and a negative one ? Thats what im asking you by your comment... Edited March 25, 2015 by Kyblack76 Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
SundownZ71 Posted March 25, 2015 Author Report Share Posted March 25, 2015 so you are running your door speakers off the headunit and the sub off an amp? if that is true you are just going to have to set your gains at where you think you door speakers distort, or dd-1 the speaker outputs and use that as max volume. The Crescendos and Tweets in the front are on a RF P400.4, back door speakers are off the h/u. Back speakers don't sound too great at all compared to how good the Crescendos do now. Quote Link to comment Share on other sites More sharing options...
Jhunt94 Posted March 25, 2015 Report Share Posted March 25, 2015 Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Im asking you dude. "Plugged in the negative RCA instead of positive and I got the lights" what does that mean ? you have a positive RCA cable, and a negative one ? Thats what im asking you by your comment... he's probably got red and black color coding on the RCA's and assumes red is positive and black is negative...Idk..just a theory Quote 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 25, 2015 Report Share Posted March 25, 2015 Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Im asking you dude. "Plugged in the negative RCA instead of positive and I got the lights" what does that mean ? you have a positive RCA cable, and a negative one ? Thats what im asking you by your comment... he's probably got red and black color coding on the RCA's and assumes red is positive and black is negative...Idk..just a theory Next time...... let me keep going.. thanks capt bring down.......... Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
SundownZ71 Posted March 25, 2015 Author Report Share Posted March 25, 2015 Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Im asking you dude. "Plugged in the negative RCA instead of positive and I got the lights" what does that mean ? you have a positive RCA cable, and a negative one ? Thats what im asking you by your comment... Oh. I'm really not the dumbass I seem to be lol. But, to clear it up, the left was the one that gave me signal (black) right (red) did not. Quote Link to comment Share on other sites More sharing options...
Jhunt94 Posted March 25, 2015 Report Share Posted March 25, 2015 Try putting the positive probe on the speaker-out negative. (If you haven't tried already)Did you try this?Scanned over that, but I got everything to work! Plugged in the negative RCA instead of positive and I got the lights. Head unit doesn't distort also :-) the negative RCA ?... wtf does that mean ?Uh, not quite sure, I checked to see if I put the RCA's in the wrong spot on the back of the h/u, but they're all in the correct place, so. Im asking you dude. "Plugged in the negative RCA instead of positive and I got the lights" what does that mean ? you have a positive RCA cable, and a negative one ? Thats what im asking you by your comment... he's probably got red and black color coding on the RCA's and assumes red is positive and black is negative...Idk..just a theory Next time...... let me keep going.. thanks capt bring down.......... sorry man...gotta an itchy typing finger Quote 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.