_paralyzed_ Posted April 2, 2015 Report Share Posted April 2, 2015 Or you could run the rear outputs in full range and split it to both amps with a y cable, or daisy chain the amps if one of them has a line out. Link to comment Share on other sites More sharing options...
cyph3r Posted April 2, 2015 Author Report Share Posted April 2, 2015 I've reset it numerous times. I think the front RCA has voltage output its just between 0 and 0.1 and my dmm won't detect it. With the amp maxed out on the front RCA it reads around 5 volts at the speakers on each channel which is around 6 watts at 4 ohms. So 6 watts per channel lol Link to comment Share on other sites More sharing options...
SIDE SHOW Posted April 2, 2015 Report Share Posted April 2, 2015 LOL, yeah righto. can to borrow or use another deck to test it out? you don't wanna go buy a new deck to find out that the deck isn't the issue tis all. but by the sounds of it, you have a dicky deck Link to comment Share on other sites More sharing options...
cyph3r Posted April 2, 2015 Author Report Share Posted April 2, 2015 I actually do have one I can borrow didn't even think of that. I will try to get it tomorrow and try it out first Link to comment Share on other sites More sharing options...
SIDE SHOW Posted April 2, 2015 Report Share Posted April 2, 2015 goodluck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.