Hook Up?

[Polecat]

anyone have a good hookup on lowering kits?

[meade916]

call 1-877-fbi-mini (FenderBender Intl.) www.fbirides.com

ask for Phil or Dan, tell him your a kicker rep and you know me they will give you a good deal and get you all the right parts. I use a DJM drop myself and its great!

[Polecat]

thanks Steve, getting custom flames done on my Yukon next, then need to lower it a tad

how far did you lower yours??

[Polecat]

Steve, can you see what they will do on the 2/3" kit, 2003 yukon?

2" Front \ 3" Rear Kit

1)TB2000-A

1)CS2000R-3

1)SE2000 Torsion Keys

Rear Coil Springs

Rear Shock Extenders

Lowering your SUV is easy. The factory torsion bar keys are replaced with DJM's torsion keys and allow a drop of 1" - 2". No other parts to replace. You can even use the factory front shocks. The rear is just as simple, replace the factory coils springs with DJM's 3" drop coils and move the lower shock mount by installing a set of shock extenders and your done. For a little more mild drop, use 2" rear coils.

A standard front end alignment is necessary after lowering.

The suggested retail price of this kit is $320

[meade916]

4x4 or 2wd?

[Polecat]

sorry....2 wheel drive....

and your package went friday

[meade916]

awww shit!! thanks!!!!

now on the 2wd, we might need to double check, because for mine (2001 2wd), the torsion key drop wont do anything. I had to use front lower control arms and rear springs/shackle (i think thats what their called) and shortened shocks (came with the kit).

[meade916]

hey i got some 24's that would look good with that lowering kit ;)

just thought id throw that out there

[Polecat]

awww shit!! thanks!!!!

now on the 2wd, we might need to double check, because for mine (2001 2wd), the torsion key drop wont do anything. I had to use front lower control arms and rear springs/shackle (i think thats what their called) and shortened shocks (came with the kit).

well I could get by with just lowering rear....i already have new KMC 20's and Nittos, so the front is Ok, the rear is 2.5" taller than the front....so the keys didn't work on yours???

[meade916]

i didnt even try the keys......just looking at my setup i could tell it wouldnt do anything. You can get about an inch by just turning your stock torsion bar "bolts" counterclockwise a few turns. Try that.

also, let me take a look i might have some springs for you.......if i do, they are yours.