bcbrassard Posted May 29, 2015 Author Report Share Posted May 29, 2015 Here's the steps Screw front together... And begin to screw and glue! 1 1/4" oak rod for support. Two 45 degree braces in the corners per Joe X design. Tops on and a enclosure is built. Link to comment Share on other sites More sharing options...
bcbrassard Posted May 30, 2015 Author Report Share Posted May 30, 2015 My Lancer in the background, needs battery's and attention to get system up and running. Soon i hope. Get some bass for the wife going should charge me up to get my system going. Her box next to mine with 2 HDS310's off the T1500 and those battery's. These ones are good but the ones under the hood are shot. Hopefully i dont get into to much trouble with her... I told her the box would be smaller than mine. Which it is but not by much. LOL She has a big trunk and wont miss the space IMO. Well now to break out the filler for all the holes. Get everything smooth so i can take a 3/8th bit over all the edges. Primer and paint. Was thinking White since all the RF equipment is black. Goes with the storm trooper theme. I will see what she thinks.... And then do what i like! lol Link to comment Share on other sites More sharing options...
Wicks Posted May 30, 2015 Report Share Posted May 30, 2015 Nice! Love the mapped out lines on the wood before you cut it. I do the same, always gotta check things out before cutting. This post sent with 100% recycled electrons. 2004 BMW M3Mechman 280A 2 - XS Power XP30001 - XS Power D375 500F of Maxwell SuperCaps (soon to be 1000F) iPadMini2Dash mounted O-scopeAudison bitOne (Remote DRC MP) Highs Amp - PPI Art A404 Hertz HSK130 (HSK165 waiting...) DC Audio DC9.0K 2- DC Audio XL12m2LEGAL - 147.3dB @ 41Hz OUTLAW - 150.2dB @ 45Hz OUTLAW - 145.7dB @ 30Hz JUNE 2014 SOTM WINNER 2014 COLORADO PEOPLE'S CHOICE WINNER SOTM BUILD:http://www.stevemeadedesigns.com/board/topic/141656-wicks-e46-m3-build-bass-turbo-button-and-a-big-new-addition/page-68#entry2802026 Link to comment Share on other sites More sharing options...
bcbrassard Posted May 30, 2015 Author Report Share Posted May 30, 2015 Nice! Love the mapped out lines on the wood before you cut it. I do the same, always gotta check things out before cutting. Thank you sir, ya its my OCD and how i do things. I will spend hours filling and sanding the whole box to prep for primer and paint. Area's that no one will ever see but i will do it anyway. Just how i am. Thanks for commenting, i to have followed your build and you have a ton of time in your system as well. Link to comment Share on other sites More sharing options...
Wicks Posted May 30, 2015 Report Share Posted May 30, 2015 Nice! Love the mapped out lines on the wood before you cut it. I do the same, always gotta check things out before cutting. Thank you sir, ya its my OCD and how i do things. I will spend hours filling and sanding the whole box to prep for primer and paint. Area's that no one will ever see but i will do it anyway. Just how i am.Thanks for commenting, i to have followed your build and you have a ton of time in your system as well. I have OCD as well. My iPad mount has seen dozens of coats of filler and many hours of sanding and painting, trying to match the interior color exactly....which it doesn't and it drives me crazy....... I'm probly the only one to notice but that's all that matters. Yeah I've been slacking on my build but hopefully soon. Too many home projects. Got some big ideas brewing though. This post sent with 100% recycled electrons. 2004 BMW M3Mechman 280A 2 - XS Power XP30001 - XS Power D375 500F of Maxwell SuperCaps (soon to be 1000F) iPadMini2Dash mounted O-scopeAudison bitOne (Remote DRC MP) Highs Amp - PPI Art A404 Hertz HSK130 (HSK165 waiting...) DC Audio DC9.0K 2- DC Audio XL12m2LEGAL - 147.3dB @ 41Hz OUTLAW - 150.2dB @ 45Hz OUTLAW - 145.7dB @ 30Hz JUNE 2014 SOTM WINNER 2014 COLORADO PEOPLE'S CHOICE WINNER SOTM BUILD:http://www.stevemeadedesigns.com/board/topic/141656-wicks-e46-m3-build-bass-turbo-button-and-a-big-new-addition/page-68#entry2802026 Link to comment Share on other sites More sharing options...
bcbrassard Posted May 30, 2015 Author Report Share Posted May 30, 2015 On 5/29/2015 at 10:54 PM, Wicks said: On 5/29/2015 at 10:47 PM, bcbrassard said: On 5/29/2015 at 10:40 PM, Wicks said: Nice! Love the mapped out lines on the wood before you cut it. I do the same, always gotta check things out before cutting. Thank you sir, ya its my OCD and how i do things. I will spend hours filling and sanding the whole box to prep for primer and paint. Area's that no one will ever see but i will do it anyway. Just how i am. Thanks for commenting, i to have followed your build and you have a ton of time in your system as well. I have OCD as well. My iPad mount has seen dozens of coats of filler and many hours of sanding and painting, trying to match the interior color exactly....which it doesn't and it drives me crazy....... I'm probly the only one to notice but that's all that matters. Yeah I've been slacking on my build but hopefully soon. Too many home projects. Got some big ideas brewing though. I understand where your coming from. My Lancer build needs 1 door panel finish, kick panels for 8" midbass started and battery's. Been slacking and working on other projects as well. Marriage, buying a house, working alot again..you know life. lol I bought new kick panels to build for the 8" mids to keep the 6" as well. Just need to glass them up. Link to comment Share on other sites More sharing options...
bcbrassard Posted May 31, 2015 Author Report Share Posted May 31, 2015 I filled all holes today and was ready to router edges. Beautiful day, 77 degrees in the shade. you don't even want to know what it was int sun Link to comment Share on other sites More sharing options...
bcbrassard Posted May 31, 2015 Author Report Share Posted May 31, 2015 It took most of the day but was worth enjoying the day out side. Link to comment Share on other sites More sharing options...
bcbrassard Posted May 31, 2015 Author Report Share Posted May 31, 2015 Rounded edges, i will try some finish sanding tomorrow. Link to comment Share on other sites More sharing options...
bcbrassard Posted May 31, 2015 Author Report Share Posted May 31, 2015 I tried to fit it in the trunk to take a pic but.... i built it to big and will have to remove trunk panels to get it in. Oops my bad. It will fit. Go photo to end the day. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.