cyclotron_burst Posted April 9, 2008 Report Share Posted April 9, 2008 Ok I am looking for the best amp for my 2 10in Kicker CVX's any suggestions Link to comment Share on other sites More sharing options...
Polecat Posted April 10, 2008 Report Share Posted April 10, 2008 budget and impedence of subs? Behind every great man....is an underwear tag! Link to comment Share on other sites More sharing options...
cyclotron_burst Posted April 11, 2008 Author Report Share Posted April 11, 2008 2ohm dvc and I would like to stick under 1k for an amp. Link to comment Share on other sites More sharing options...
wL<3bass Posted April 11, 2008 Report Share Posted April 11, 2008 (edited) Assuming that they are dvc 2 each and you would wire them into a series to a 2ohm load and I say kicker zx1500.1 edit: new '08 model 1500.1 http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=19541 $599 shipped and a '06 model 2500.1 http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17036 $663 shipped if you are a novice I would recommend getting the 1500.1, if not get the 2500.1 but know how to moderate your gains as well as the electrical to handle the 2500.1 and for a diagram here: http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3 hope that helps Edited April 11, 2008 by wL<3bass Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
cyclotron_burst Posted April 11, 2008 Author Report Share Posted April 11, 2008 currently they are wired into a series and yes they are both 2ohm dvc. My electrical system currently is 0ga power and ground. Also I have upgraded my altenator power and engine ground Link to comment Share on other sites More sharing options...
Polecat Posted April 11, 2008 Report Share Posted April 11, 2008 (edited) agree above, ZX10001 or ZX15001. Edited April 11, 2008 by Polecat Behind every great man....is an underwear tag! Link to comment Share on other sites More sharing options...
Recommended Posts