baron_of_bass Posted July 21, 2015 Report Posted July 21, 2015 The Ampere 3800 is our old 3500D v.1 board -- the v.2 is really nothing like that anymore Well... That escalated quickly ? Quote Team Bass-Hz
cocoleveo7686 Posted July 21, 2015 Report Posted July 21, 2015 so if you wire to .5 ohms your amp never really sees .5 after box rise? Quote
baron_of_bass Posted July 21, 2015 Report Posted July 21, 2015 so if you wire to .5 ohms your amp never really sees .5 after box rise? That's right, the point of wiring lower is to keep the impedance closer to the amps highest output after box rise. The box rise all depends on the box though. Some people get very little box rise, which in most cases is a good thing, and for others it can rise a few ohms. Quote Team Bass-Hz
tboorn Posted July 21, 2015 Report Posted July 21, 2015 damn that v2 board is seriously stacked compared to the v1. looks awesome! Quote Fidelity Built to Last Team Sound Asleep 24Runner Build Log: http://www.stevemeadedesigns.com/board/topic/196657-24runner-sleeper-system-lots-of-fi-neo-dd-focal-new-video-w-juicebox-lithium/ 2 x 12" Fi BTL N2 / 2 x 12" Fi BTL N3 2 DD M3b Maxwell 2.7V 3000F Supercapacitors Pioneer DEH-80prs Focal P165 V30 components Rockford Fosgate T-400.4
Miguels Posted July 21, 2015 Report Posted July 21, 2015 You don't want to wire an amp below manufacturer rating. The amp will fail sooner or later and will not be covered under warranty. For a few extra watts and the cost of electrical to support it is not worth it. Better off buying a bigger amp if you want more power Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.