need help Building a vented enclosure for three rockford fosgate t1d212

[Thizz719]

hello I need help designing a vented enclosure to put in my 06 impala the available area is 17" H x 36" W x 36" D the woofer displacement 0.106 cu. ft. the box needs to be 7 cu. ft. with a port 40 sq inch opening and length of 7.5" is what I was told over the phone with Rockford fosgate if anyone can help me put one together that would be great. thanks

[Triticum Agricolam]

40 sq in is WAY too little port for three of those subs, 40 sq in per sub would be much more appropriate, though it depends on how much power you are going to be running. What amp are you going to be using?

With a box that is only 36" wide you aren't going to be able to fit all three subs on the same face, or have room for the port. What are your intentions for how you are going to place the subs on the box?

[Thizz719]

i got a rockford fosgate power t1500-1bdcp

[Thizz719]

Maybe a Sealed enclosure would work

[Thizz719]

Can Anyone Help design a enclosure for three or two rockford fosgate t1d212 sealed or vented not looking to break windows just looking for some good quality bass?

[Triticum Agricolam]

With 36" of width to work with you are probably better off just using two subs. So figure 2.33 cu ft of net volume and 40 sq in of port per sub.

Have you tried downloading Torres and plugging the dimensions in and seeing what you can make work?

[Thizz719]

No

[Triticum Agricolam]

No

Well, maybe you should.

Here is a link to Torres: https://dl.dropboxusercontent.com/u/12084540/TorresBTC.rar

[Thizz719]

sorry just did but dont know how to upload the picture

[Wehan]

Click "screen shot" at the bottom of Torres and save to desktop of your pc, next upload the picture file to photobucket or another photo hosting site and then post the "img" link here.