91explorer Posted September 16, 2016 Report Posted September 16, 2016 Right now i have 2 skar audio Lp 1000.1dv2 amps and i wanna run 4 amps. i know i can have one amp as the master amp and the other 3 amps as the slave amps. i was wandering how i can hook up 4 skar audio vvx12v3d4 to the amps? Head unit Pioneer deh-80prs Sub Amp Highs Amp Skar audio Lp 60.4 Tweeters and Highs 2 Skar audio fsx 6.5 and 2 spx-t Subs Batteries? alt?
skaraudio Posted December 14, 2016 Report Posted December 14, 2016 Being that you have 4) VVX-12v3 D4 if you did 2 on 1 amp it would be @ 1 or 4 ohm i would not suggest that. Maybe put 1 amp on 1 sub i would recommend this. -Shane Skar Audio www.SkarAudio.comPhone : (888) 501-7527
ZOO-DEE Posted December 24, 2016 Report Posted December 24, 2016 If it was me , I would break in the subwoofers and burn in the amp first @ 2 ohm load . That amp supposedly gives 700 watts into a 2 ohm load and those subs are rated @ 600 watts. I wouldn't turn the volume up past half-way for the first month or about 10 hours of playing music. If you're planning on running one subwoofer per amp , then each sub would play @ 2 ohms (recommended) or an 8 ohm load . Thats what I would do if you wanted to run all the equipment you had.
MrSkippyJ Posted December 24, 2016 Report Posted December 24, 2016 Run one sub per amp and go full tilt from the get go at 2ohms each. Don't worry about break in they will be fine. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Recommended Posts