Jessica Posted October 23, 2016 Report Share Posted October 23, 2016 So i was asked to post this. Anyway, If anyone remembers i had an 87 accord walled off, 210k miles on the engine. I parked it because it needed 5th gear, various front end bushings and better rear springs. Then i found an 89 accord with 140k miles but the previous owner ran it out of water and then filled it while it was hot and probably cracked the block let alone the blown head gasket. I figured it would be cheaper just to swap motors because i didnt know for sure what would need fixed. So this is the pictorial of that saga. Keep in mind i dont mechanic by trade, i just work on my own stuff when i can. On with the show, failures included. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 this is the old honda and the newer one Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 The newer one is super clean btw. so here are a bunch of pics i took of various vacuum lines and such so i would know where they went later... Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 Of course there were strange differences, like this throttle linkage and the whole damn intake turned out to be different as well. This is were i was disconnecting the clutch cable Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 Good thing i had my diamondboxx to keep me company. i hate these clamps, i dont know how they are suppose to come off so i just twist the bastards but they never go back quite right lol Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 the exhaust manifold was different on the 89 as well, it has two pipes and the 87 had one. So two o2 sensors instead of one. the wire harness was completely different. Random plugs had changed, and the whole harness main plugs were different. so anyway, here is the good engine coming out transmission and all since its a bitch to separate them in the engine compartment and now that its out, they are seperated Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 there was this one motor mount nut that i thought was just super tight, 1/2" braker bar and cheater and found out it ws tacked in place lol here is the other engine coming out. damn shame, it was so clean too. since it was an automatic, it came out easier and without the transmission attached, Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jessica Posted October 23, 2016 Author Report Share Posted October 23, 2016 so some random other things i ran into, like my aluminum radiator has JIC conectors for coolerlines for the transmission and the stock had some other thing so i had to put the older one in for now. I had to swap intakes with the engine installed because i couldnt resolve the vacuum lines and electronics even by swapping out the plugs with the mismatched ones. Anyway, after swapping intakes and getting everything hooked up its running like a top. This is to be my wifes car, and i really want to take it because it drives so damn nice. Anyway, she spent every evening after she got home hanging out in the garage helping where she could and that was awesome. She loves the car and im glad im done with it for now. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted October 24, 2016 Report Share Posted October 24, 2016 I love it when my wife hangs out with me, that's a good feeling. Love those old Hondas. My wife had a 89 accord. Sedan with a sun roof 5 speed. It was a blast to drive. I had just done a timing belt and water pump. paid a fortune for a new radiator. new battery. 300k miles and she let her brother drive it. Wrecked it and the insurance company said it was worth $750. We miss that car. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Kyblack76 Posted October 24, 2016 Report Share Posted October 24, 2016 Well done man. Hell of a job bud. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.