JMCDONALD2390 Posted December 1, 2016 Report Posted December 1, 2016 So I'm running a factory head unit into a 3sixty.3. Should I run the DD-1 before I run the configuration on the 3sixty.3? Quote
reedal Posted December 1, 2016 Report Posted December 1, 2016 you should DD-1 everything. HU, 3sixty, amps, etc. if it has volume, gain, or adjusts the signal in any way, it should be DD-1'ed Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Rocbola Posted December 1, 2016 Report Posted December 1, 2016 Yea, you want to find the maximum undistorted volume on your headunit first, before you DD-1 the processor, then the amps. Quote
JMCDONALD2390 Posted December 1, 2016 Author Report Posted December 1, 2016 So reset the 3sixty, DD-1 the head and amps then reload the 3sixty configuration file? Quote
bcbrassard Posted December 2, 2016 Report Posted December 2, 2016 So reset the 3sixty, DD-1 the head and amps then reload the 3sixty configuration file? No, HU, 360.3 & then amps Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.