theaestheticgreek Posted October 12, 2017 Author Report Share Posted October 12, 2017 Oh ok I didn’t expect you to do another one bro. I did some numbers yesterday and I figured out that extending the depth of the box to 8~5/8 with 15.5H and 48 W would give me the same time and specs as the second one you did. I think so at least? I’d just change the port opening a little and keep the port length the same. But anyways you end done more than enough man and I definitely will be careful. I’m pretty good at setting gains and what I can do is put the port on my side so if something starts to get smelly I’ll pick it up quick. I’ve got a good deck though to. Thank you sir. I’m gona work on the cardboard text box to. But honestly it’s gotta work cause otherwise I’m gonna have to get creative to be able to make the box fit Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 13, 2017 Author Report Share Posted October 13, 2017 Just for the heck of it. I’m gonna build the other box to. Maybe I’ll build it just how you designed it to rather than putting the port up top. And the places in the assembly guides. Those little 45s are what? Just like, maybe an estimated 3 inches at the widest point? Link to comment Share on other sites More sharing options...
Joe X Posted October 14, 2017 Report Share Posted October 14, 2017 Here's the size of the 45s for the latest box I posted: These 45s are optional, not strictly necessary, the one inside the port should be built perfectly or could actually hurt performance rather than help, let us know what you did in the end and how it went. Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 24, 2017 Author Report Share Posted October 24, 2017 Hey Joe, just wanted to drop an update right quick. Life’s been crazy and I’ve been without my own garage and have had a bucket of tools everywhere I’ve gone and been since I started my little journey to knock out this box. Gotta day I’m super thankful for the help to. I’m pretty passionate about building and I’m learning a lot as I go. I’d like to swoop some legit design software and begin doing this shit on the reg to. Anyhow, idk if I mentioned it earlier but I’m basically a really good looking and pretty tan homeless guy, but I’ve managed to get this much done out of the bed of my truck. Like I’ve built what I’m about to show you from my tailgate. Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 24, 2017 Author Report Share Posted October 24, 2017 I was so stoked to build again I spent my last canned foods allowance on a router lol. Rather lose a couple pounds than have to build like a bimbo again Link to comment Share on other sites More sharing options...
Joe X Posted October 24, 2017 Report Share Posted October 24, 2017 Great job on the box and thanks for the update, you will really need those cross-braces front to back on the figure if not more, box needs to be stiff to work well, sorry to hear you are having a hard time with money right now, if you intend to keep doing this I would still consider the router a good investment. Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 25, 2017 Author Report Share Posted October 25, 2017 Box is built just gotta head over to Oregon and grab my amp, steal the binding posts off my other box and grab some power wires n shit and I’ll toss up a vid. Bout to start making the cuts for the first box you designed. Same tuning so should be kinda cool to see the difference. All I’d really expect is a little better power handling and maybe have a little more control over the woofer... resulting in a probably louder setup? We’ll see Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 25, 2017 Author Report Share Posted October 25, 2017 Oh and I did toss the two pieces of dowel in. I’ve always been a fan of threaded rod but dowels are less complicated Link to comment Share on other sites More sharing options...
theaestheticgreek Posted October 26, 2017 Author Report Share Posted October 26, 2017 So joe. We didn’t do any 45s for box #1 huh? Link to comment Share on other sites More sharing options...
Joe X Posted October 26, 2017 Report Share Posted October 26, 2017 If you mean the one with the port firing sideways then it's because the port doesn't turn in that design. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.