dave6575 Posted January 26, 2018 Report Share Posted January 26, 2018 good day i'm trying to get help into build an enclosure for 2 sundown sa -10 dual 2 the car it will be used in is a station wagon i downloaded the box design from sundown website i would like to know if with the said design the subs would be able to handle 3000 rms playing from 25hz to 40 hz without damaging the subs is there anyone that i can pay for online subwoofer box designs or can someone help me with the box design any help is greatly appreciated thank you Link to comment Share on other sites More sharing options...
bcbrassard Posted January 26, 2018 Report Share Posted January 26, 2018 Welcome to the forum. Couple guys on here are really good with designs and will probably chime in. You gave good info, it would help if you included the dimensions your working with. Tuned in, would love to change my HDS310's for some SA-10's. Link to comment Share on other sites More sharing options...
dave6575 Posted January 27, 2018 Author Report Share Posted January 27, 2018 max lenght 44 inches height i would like to be between 12 to 13 and depth less than 18 if possible would prefer enclosure 38'' x 13'' and whatever depth sub with be crossed with a matrix with 25hz chip and cutoff at 40hz or maybe 50z with setting from deh 80prs Link to comment Share on other sites More sharing options...
dave6575 Posted January 27, 2018 Author Report Share Posted January 27, 2018 ok what do you guys think about this one i found online don't know if its for sundown sa 10 though Link to comment Share on other sites More sharing options...
Joe X Posted January 27, 2018 Report Share Posted January 27, 2018 That box specs are 1.7 cubic feet net tuned to 35Hz per chamber (30 square inches of port area), that is rather big for those subs on that power. If you build it use your subsonic filter to 31/32 Hz to avoid possible bottoming out. Link to comment Share on other sites More sharing options...
dave6575 Posted January 27, 2018 Author Report Share Posted January 27, 2018 So would the recommend box design be better and subs could take the amount of power Link to comment Share on other sites More sharing options...
dave6575 Posted January 28, 2018 Author Report Share Posted January 28, 2018 I tried the first design but the sub does bottom out Link to comment Share on other sites More sharing options...
dave6575 Posted February 1, 2018 Author Report Share Posted February 1, 2018 Any suggestions ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.