tbeats Posted February 22, 2018 Report Share Posted February 22, 2018 So I have the focals on a Rockford p300x2 the speakers are 2ohm with my whimpy stock wire they read 2.9ohm at the amp . My question is with that amp should I even set the gain with the dd1 with any over lap? The speakers are 80rms .i set with 0db now and they seem kinda Weak Link to comment Share on other sites More sharing options...
Robert8252 Posted February 23, 2018 Report Share Posted February 23, 2018 those comps should make plenty of noise with that amp set with a dd1. Make sure your positive and negative aren’t backwards on one of the speakers. 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
tbeats Posted February 23, 2018 Author Report Share Posted February 23, 2018 3 hours ago, Robert8252 said: those comps should make plenty of noise with that amp set with a dd1. Make sure your positive and negative aren’t backwards on one of the speakers. They are wired correctly I checked, should I actually use overlap say set at -5db? Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 23, 2018 Report Share Posted February 23, 2018 12 hours ago, tbeats said: They are wired correctly I checked, should I actually use overlap say set at -5db? You can set it at -59 if you want. Set at 0, and wired at 3ohm, i bet they are quiet as shit, as in not loud at all right ???? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
tbeats Posted February 23, 2018 Author Report Share Posted February 23, 2018 2 hours ago, Kyblack76 said: You can set it at -59 if you want. Set at 0, and wired at 3ohm, i bet they are quiet as shit, as in not loud at all right ???? You are correct! I’m planing on running 14ga direct from amp to crossovers asap once weather is clear and I have a free day. I’m thinking then 0db might be fine cause amp will see 2ohm or I believe focal says 1.8 , but for now with that 3ohm load would -5db be safe ? Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 23, 2018 Report Share Posted February 23, 2018 Tuff to say. I dont even know if wiring at 2ohm will give ya what you need. You have a meter to see yes (from above post) Try it, and see, you can over lap at -2.5 , or -.5 and see. With mids and tweets, you'll know when your acting a fool. Burning up tweets is hella easy tho. I dont ever wanna burn up gear either, that aint me, not at all, but, shit, not loud enough, is clearly no fun also. When your ready, let me know, and i can find and send you more tracks. Maybe -2.5 (right in the middle) will be the ticket. Ill bet ya might go to -5 tho. Just try it and see. Get it wired up, set it, and let er wang, but, carfully. I think youll know pretty quick if its going to do, what you think and want. I mean, dont expect the world, but..... when its CLEARLY not doing what you KNOW it can, or should, then your set to conservative. Again, im not the guy that burns shit up. Ever. But, i do like to get the most outta my gear. Fooooo show.... EDIT- and you lost me a bit, with, adding larger wire should net you a lower nominal,... im a bit lost there, but.... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
tbeats Posted February 23, 2018 Author Report Share Posted February 23, 2018 46 minutes ago, Kyblack76 said: Tuff to say. I dont even know if wiring at 2ohm will give ya what you need. You have a meter to see yes (from above post) Try it, and see, you can over lap at -2.5 , or -.5 and see. With mids and tweets, you'll know when your acting a fool. Burning up tweets is hella easy tho. I dont ever wanna burn up gear either, that aint me, not at all, but, shit, not loud enough, is clearly no fun also. When your ready, let me know, and i can find and send you more tracks. Maybe -2.5 (right in the middle) will be the ticket. Ill bet ya might go to -5 tho. Just try it and see. Get it wired up, set it, and let er wang, but, carfully. I think youll know pretty quick if its going to do, what you think and want. I mean, dont expect the world, but..... when its CLEARLY not doing what you KNOW it can, or should, then your set to conservative. Again, im not the guy that burns shit up. Ever. But, i do like to get the most outta my gear. Fooooo show.... EDIT- and you lost me a bit, with, adding larger wire should net you a lower nominal,... im a bit lost there, but.... Currently with the stock wire from behind the H.U to the doors is causing a rise from my speakers my last set that was a 4ohm was reading like 6 ohm in the rear of the car at the amp idk if the car has some crazy stock crossovers from the factory speakers in-line I don’t see or what. Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 24, 2018 Report Share Posted February 24, 2018 19 hours ago, Robert8252 said: those comps should make plenty of noise with that amp set with a dd1. Make sure your positive and negative aren’t backwards on one of the speakers. Thread jacking here.... all apologies But, Robert ????? WHERE IN THE ABSOLUTE FUCK, have you been ? And dude, i have a new PSN account.... id like to be buddies again for the gaming LOL. Man, i havent seen you for ever dude. Hope your well. (old kylar96 bro ) SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
tbeats Posted March 16, 2018 Author Report Share Posted March 16, 2018 Upgraded to the focal krx2 components they have a rms of 100 watts, I ran direct 14 gauge from amp to the doors. When I check Impedance I get 1.9 ohm per so that’s maximizing that Rockford amp given the power that thing puts out would I be safe going into any gain overlap at all? Link to comment Share on other sites More sharing options...
Robert8252 Posted March 17, 2018 Report Share Posted March 17, 2018 On 2/23/2018 at 7:13 PM, Kyblack76 said: Thread jacking here.... all apologies But, Robert ????? WHERE IN THE ABSOLUTE FUCK, have you been ? And dude, i have a new PSN account.... id like to be buddies again for the gaming LOL. Man, i havent seen you for ever dude. Hope your well. (old kylar96 bro ) Sorry just saw this! But you know. Here, there, everywhere. Working non stop and starting to throw money into this stuff again. I’ll pm you my psn name when I log in and double check. 9 hours ago, tbeats said: Upgraded to the focal krx2 components they have a rms of 100 watts, I ran direct 14 gauge from amp to the doors. When I check Impedance I get 1.9 ohm per so that’s maximizing that Rockford amp given the power that thing puts out would I be safe going into any gain overlap at all? I wouldn’t set the gain with anything less than the -5 personally. I usually use the 0db tone for mids and highs. 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.