Jdub13 Posted March 1, 2019 Report Share Posted March 1, 2019 I have Directed 1200 2ch and its running on slave instead of master is that robbing its potential power. Link to comment Share on other sites More sharing options...
reedal Posted March 2, 2019 Report Share Posted March 2, 2019 If you only have one of those amps then run it on master. Master/slave is used when strapping two amps together SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
DiBo Posted March 2, 2019 Report Share Posted March 2, 2019 I'm surprised you're getting any output out of the amplifier at all. Usually running a single amplifier in slave mode renders it useless. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.