BMG18 Posted August 26, 2020 Report Posted August 26, 2020 got design for my box .. 35.5 W x16.5 T x 18.5 D After material thickness ... roughly 5.9 ft3 after subs ... question I need help with is my center port calc. ... I have 4” W x 16.5 T x 21.75 L figured for port in general area of 32hz... will it work out fine? Should port be wider/smaller ? Any input would help thanks
1point21gigawatts Posted August 26, 2020 Report Posted August 26, 2020 How much rms is the amp? “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.”
BMG18 Posted August 26, 2020 Author Report Posted August 26, 2020 21 minutes ago, 1point21gigawatts said: How much rms is the amp? Skar sk3500 .... planTo get 5k eventually.. I got the Alternator u helped me with finally so just waiting on box
1point21gigawatts Posted August 26, 2020 Report Posted August 26, 2020 Make the port 6” wide. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.”
1point21gigawatts Posted August 26, 2020 Report Posted August 26, 2020 2 hours ago, BMG18 said: got design for my box .. 35.5 W x16.5 T x 18.5 D After material thickness ... roughly 5.9 ft3 after subs ... question I need help with is my center port calc. ... I have 4” W x 16.5 T x 21.75 L figured for port in general area of 32hz... will it work out fine? Should port be wider/smaller ? Any input would help thanks And how is the enclosure itself 16.5” tall and the port is 16.5” tall too? You made an error in figures. The port would be 15” tall because you would have to factor in the other boards. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.”
1point21gigawatts Posted August 26, 2020 Report Posted August 26, 2020 I can help design you an enclosure. What kind of vehicle is it going in and what kind of subwoofer(s)? “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.”
BMG18 Posted August 26, 2020 Author Report Posted August 26, 2020 4 minutes ago, 1point21gigawatts said: And how is the enclosure itself 16.5” tall and the port is 16.5” tall too? You made an error in figures. The port would be 15” tall because you would have to factor in the other boards. The box itself would be 37x18x20 .. I took 1.5” for wood thickness .... 3rd gen 4 runner.. 2 dc lvl 4 12” ... the width has to be under 38 but other sizes can be changed... my design was port back sub up
1point21gigawatts Posted August 27, 2020 Report Posted August 27, 2020 I’ll handle it for you. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.”
Recommended Posts
Archived
This topic is now archived and is closed to further replies.