Chris313 Posted March 13, 2021 Report Posted March 13, 2021 Running 6x9's in the front doors and 6 1/2's in the back doors. With a single 12in sub in the back. What should my crossovers on my amps be set at?
Dafaseles Posted March 13, 2021 Report Posted March 13, 2021 What amps are you using and what speakers are they? 2011 Chevy Silverado under construction My build log here. Check it out!
Chris313 Posted March 13, 2021 Author Report Posted March 13, 2021 Sorry, I have Skar Audio 6X9's RPX series 90 watts RMS 270 Max, Skar Audio 6 1/2's 60 watts RMS 200 watts max running on a Kicker CXA300.4 Also have a 12in Skar Audio sub 600 RMS, 1200 Max running on a Kicker CXA800.1. Thank you
Dafaseles Posted March 13, 2021 Report Posted March 13, 2021 On the 4 channel, I would set the switch to hi, then set the crossover to about 85 hz-95 hz. For both amp 1 and amp 2. The mono, it looks like there's only a low pass crossover that only goes down to 90 hz. Just set it at 90 and that should be fine 2011 Chevy Silverado under construction My build log here. Check it out!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.