damd1994 Posted January 18, 2022 Report Share Posted January 18, 2022 Removed all seats except driver in 2008 sentra. Cut out rear deck all the way to windshield added alternate bracing. I have 3 agm 1 lithium battery 320 amp alternator and salt 4 for 2 deafbonce apocalypse db4515r d2 parralel at .5 ohm Deaf Bonce Db4515r Fs: 32 Hz, Vas: 2.415cu.ft, Qts: 0.36 I have built 2 ported boxes and was loud af but decided to try 6th order and failed. Any advice on exact box parameter for both subs would be much appreciated. Also they are 135lbs each so subs up is the easiest way to mount in such a small area. The terminals started arching from the aluminum basket so im struggling to find an alternative option to connect triple tinsel to 4g wire without movement,noise,change in ohms Link to comment Share on other sites More sharing options...
Joe X Posted January 18, 2022 Report Share Posted January 18, 2022 Can you post the full specs of the boxes you have already tried (including port areas) along with some pics of your setups? Link to comment Share on other sites More sharing options...
BassMunky Posted January 18, 2022 Report Share Posted January 18, 2022 Picss Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
damd1994 Posted March 23, 2022 Author Report Share Posted March 23, 2022 20220225_101516_1.mp4 Link to comment Share on other sites More sharing options...
damd1994 Posted March 23, 2022 Author Report Share Posted March 23, 2022 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.