AvensisTurbo Posted July 15, 2022 Author Report Share Posted July 15, 2022 Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 16, 2022 Author Report Share Posted July 16, 2022 Sanding the paint with 2500, and then 3 different pads to get it back to mirror finish. In the left on the picture there is a part that is dull, this is after sanding and before polishing. Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 20, 2022 Author Report Share Posted July 20, 2022 Fitting the amp in the trunk and thinking of how to install it.... flat... angled... vertical.... Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 21, 2022 Author Report Share Posted July 21, 2022 Drawing the trunk in CAD. I think a 45 degree angle for the amp would be best. Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 22, 2022 Report Share Posted July 22, 2022 Very nice. I know nothing about that PG board. But, holy shit, back in the late 80s, and early 90s, ... i would absolutely drool at stereo shops, looking at the old OG Phoenix Gold boards they had behind the glass. And that board, looks awesome. Ill have to do some sniffing around on that. Great work/progress on the set up. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 22, 2022 Author Report Share Posted July 22, 2022 Thank you, here are some specs Channels 1 & 2 – 75w X 2 @4Ω 100w x 2 @2Ω Channels 3 & 4 – 75w X 2 @4Ω 100w x 2 @2Ω Channels 5 & 6 – 75w X 2 @4Ω 100w x 2 @2Ω Channels 7 & 8 – 150w X 2 @4Ω 225w x 2 @2Ω Channel 9 – 800w X 1 @2Ω 1000w x 1 @1Ω Subwoofer Use Only 20 to 200Hz Average Current Draw @ 14.4v Music: 125A at 4Ω Stereo Channels & 2Ω Mono Channel Power Terminal: 4 Gauge (Dual) Speaker Terminal: 10 Gauge Topology Class: Hybrid AB/D Heatsink Type: Extruded Aluminum Cooling Type: Push Pull Fan Operating Voltage: 11.0V to 16.1V Class AB and D hybrid audiophile audio design Overbuilt quad-unregulated power supplies Hand-wound power supply transformers Triple Darlington output section with Sanken output devices PUR Technology direct signal input circuitry JET fan-cooled chambered heatsink thermal system Gold-plated 3-oz. circuit board Dual 1/0 power input terminals Panel-mounted RCAs High-temperature Plexiglas cover Audio precision quality control verification Hand-signed power output birth certificate Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 22, 2022 Author Report Share Posted July 22, 2022 Making a forged carbon steering wheel. Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 22, 2022 Author Report Share Posted July 22, 2022 The SPA digital dual gauge that replaces the old OEM temp gauge. I had to remove some electrical components from the dial board to make room for the gauge. I also torn down the connector on the board of the SPA gauge and soldered in some extension wire with a new connector to just get it in with about 1 mm room and connect the new wire to the loom of the SPA. This is what the gauges look like when turned on. Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 22, 2022 Author Report Share Posted July 22, 2022 The gauge working in the gauge cluster. Link to comment Share on other sites More sharing options...
AvensisTurbo Posted July 22, 2022 Author Report Share Posted July 22, 2022 Holes for the bolts of the left plate are also drilled, next step is to make the hole for the speakers and sound deaden the rear deck. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.